













| Connector | 1/8" TRS Jack. Tip: right / Ring: left / Shield: ground |
|---|---|
| Headphone Level Power | 100mW into 50 Ohms |
| Pads | 8 velocity-sensitive multi color assignable pads |
|---|
| External Pedal Input | 1/4" TRS Jack |
|---|---|
| Device Connector | mini-DIN |
| DC barrel | 1x DC barrel. For power and device charging. |
| Gain Range | 46 dB |
|---|---|
| Phantom Power | +48V +/- 4V |
| Frequency Response | 20 Hz - 20 kHz +/-1.5dB |
| Frequency Response | 20 Hz - 20 kHz +/-1.5dB |
| Input Noise | -100 dB RMS |
| Capsule Type | condenser, electret |
| Polar Pattern | cardioid |
| Capsule Size | 0.55" |
| Maximum Sound Pressure | 130 dB SPL (1% THD @1kHz) |
| Sensitivity | -36dB (@1kHz, 0dB=1V/Pa) |
| S/N ratio | >75dB |
| Connector Type | male 3-pin XLR |
| Length | 18.5" (47cm) |
| Weight | 4.94 oz (140g) |
| Microphone Type | gooseneckbalanced female 3-pin, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground |
| Microphone Input Level | from 6 mVpp to 1.4 Vpp |
| Microphone Input Impedance | 3.2 kOhms |
| Floating Balanced Outputs | with automatic level compensation when working in unbalanced mode |
|---|---|
| Line Outputs | 2x balanced, TRS 1/4" Jack, Tip: hot / Ring: cold / Shield: ground |
| Maximum Output Level | +13 dBu into 600 Ohms balanced load |
| Frequency Response | From 10 Hz to 21 kHz (+/- 0.2dB) |
| Output Dynamic Range | 102 dB(A) |
| Output Impedance | 150 Ohms balanced |
| Keys | 25 full-size keys with velocity |
|---|
| Frequency Response | 20 Hz - 20 kHz +/-1.5dB |
|---|---|
| Input Noise | -100 dB RMS |
| Gain Range | 27 dB |
| Instrument Input Impedance | 1 MOhms |
| Instrument Input Level | from 30 mVpp to 6.9 Vpp |
| Instrument Input | unbalanced, Hi-Z, TS 1/4" Jack, Tip: signal / Shield: ground |
| System Requirements (Contd..) | ComputersMac: macOS 10.6 or later. One free USB port.Windows: Fully supports Windows 10 WASAPI for low latency audio. One free USB port. (ASIO4ALL is required on Windows 7 and 8 for low latency audio.)(On Windows XP iRig Keys I/O works only as MIDI controller.)(Use only the specified AC adapter) |
|---|---|
| System Requirements (Contd.) | Also compatible with iPhone X, iPhone 8 Plus, iPhone 8, iPad 9.7-inch (6th generation 2018).(iPhone 7, iPhone 7 Plus, iPad 9.7-inch (6th generation 2018): iOS 12 or later is required.) |
| System Requirements | iOS Devices: Compatible with iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (12.9-inch) 1st Generation, iPad Pro (9.7-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 5th generation, iPad 4th generation. iOS 6 or later is required. |
| Control Surfaces | Slider strips for pitch and modulation (user programmable)Octave, program change and transport5 programmable touch sensitive encoders |
|---|---|
| Dimensions | 14.7 x 8.2 x 2.6" (373 x 208 x 65mm) |
| Weight | 44.5 oz (1.26kg) (batteries excluded) |
| Power | USB bus powered when used with a computerBattery powered (4xAA included) when used with an iOS deviceDC power supply (not included, iRig PSU 3A sold separately) |
|---|---|
| Sampling Rate | 44.1 kHz, 48 kHz, 88.2 kHz and 96 kHz |
| Conversion | 16 or 24-bit A/D - D/A |