Car Subwoofers

Filter Results
Search
1 - 20 of 25
Sort by: 
    • Vented cast aluminum basket
    • 2.5" wet wound voice coil
    • 120oz magnet
    • Fiberglass reinforced cone
    • Dual 12" M7 Subwoofer
    • 120oz Magnet
    • 83.3dB Sensitivity
    • 750/1500w RMS/Peak
    • 38.19" W x 16.14" H x 17.8" (Bottom) and 14.17" (Top) D
      • Dual 12 inch M7 Loaded Subwoofer Enclosure
      • Documentation
      • 350 Watts Peak Power
      • 175 Watts RMS
      • 4-Ohm Voice Coil
      • Sensitivity: 88.1 dB
      • Frequency Response: 30Hz - 500Hz
      • Injection-Molded Polypropylene Cone
      • Co-molded Santoprene® Surround
      • UniPlate™ Back Plate And Pole Piece
      • Thick Tinsel Leads
      • Large Ceramic Magnet
      • Rear Gasketing Included
      • Polymer Basket Resists Corrosion
      • Protective Terminal Cap
      • Stainless Mounting Hardware Included
      • 10" Woofer
      • Back gasket
      • 8 x Mounting screws
      • 8 x Mounting screw clips
      • Manual
      • 12" Powered Subwoofer
      • Slipstream Port Technology
      • Single Box system
      • MDF Wood Enclosure
      • Volume remote control
        • 1x Powered subwoofer
        • 1x Bass volume remote control
        • 2x high level input wiring harness
        • 1x 25A fuse
        • injection-molded polypropylene cone
        • power handling: 50-400 watts RMS (200 watts per coil)
        • 800 watts peak power handling
        • sensitivity: 86.9 dB
        • Single 12 Inch
        • Enclosure Type: Ported
        • 94 dB Sensitivity
        • 600 Power Watts RMS
        • Impedance: 2 Ohm
        • Frequency response: 25 - 100K Hz
        • Thick MDF Construction
        • Thick Black Carpeting
        • One loaded enclosure with one 12-inch subwoofer mounting hardware (4 - black brackets, 4 - #10 black wood screws x 20mm, 8 - #8 black wood screws 20mm long)
        • One Owner's Manual
        • Two Stickers
        • 10" Ultra Slim Subwoofer
        • All-aluminum frame
        • Fail-safe Integration Technology PLUS
        • Adjustable low-pass crossover
        • Molex® plug and harness includes power, signal and remote turn-on
          • Hideaway 10" Subwoofer
          • Remote control
          • Documentation
          • Single 12" SRX Slim Subwoofer
          • Remote level control included
          • High/low level input
          • Signal sense auto turn-on
          • All in one bass system
            • Single 12" Bass System
            • Documentation

          JBL BassPro Hub Subwoofer

          Model #BASSPROHUB

            • Powered 11" subwoofer enclosure
            • Mounts to hub of spare tire
            • Fiberglass cone with rubber surround
            • Class D amplifier (200 watts RMS)
            • Wired remote included (controls level, crossover frequency, phase, and bass EQ)
            • Variable low-pass crossover (50-150 Hz, 24dB/octave)
            • Phase switch (0°, 180°)
            • Bass boost (0-12 dB at 50 Hz)
            • Amplified subwoofer
            • 30-amp ATO fuse (installed)
            • 12" Power/input harness
            • Wired remote control (16' Cable attached)
            • Mounting post
            • Factory mounting bracket adapter
            • 2.5mm Allen Wrench
            • Owner's manual
            • Plus One™ Woofer Cones
            • Convertible Design
            • Perimeter Illumination
            • SSI (Switch-Selectable Impedance)
            • Mylar Tweeters with Integrated Grilles
            • One-piece Polymer basket
            • High Sensitivity
            • Voicing of Speakers
            • Harman Standard Reliability Testing
            • 10" Marine Woofer
            • Documentation
            • Impedance (OHMS): 4 SVC
            • Max Rec Amplifier Power (WATTS PEAK/RMS)*: 300/150
            • Sensitivity (dB 1w/1m): 88.3
            • Frequency Response (Hz): 27-500
            • Mounting Depth (in, cm): 5-7/8, 14.8
            • Mounting Cutout (in, cm): 11, 27.9
            • Min Sealed Box Vol (cu. ft, L): 1.25, 35.4
            • Max Sealed Box Vol (cu. ft, L): 3.5, 99.1
            • Min Vented Box Vol (cu. ft, L): 1.75, 49.6
            • Max Vented Box Vol (cu. ft, L): 2.25, 63.7
            • Size (IN.,CM): 10, 25.0
            • Impedance (OHMS): 4 SVC
            • Max Rec Amplifier Power (WATTS PEAK/RMS)*: 300/150
            • Sensitivity (dB 1w/1m): 86.2
            • Frequency Response (Hz): 30-500

              *Assumes typical music program with minimal amplifier clipping; varies with enclosure size. See your KICKER dealer for details.
              • High Density MDF Construction
              • Stylish Black Carpet Finish
              • High-Speed MOSFET Power Supply
              • Studio-Grade Bipolar Output Stage Transistors
              • Mute and Delay Soft Start System
              • Full IC-Controlled Protection Circuitry
              • RCA Preamp Line Output
              • ELNA Brand Audiophile Capacitors
              • Status Mode LED Indicator
              • High Level Input with Smart Auto Turn-On
              • 12" Subwoofer Box
              • Documentation
              • Ultra-slim 3” mounting depth
              • Injected poly dust cap and cone with PR family appearance
              • Heavy duty stamped basket
              • Rubber surround
              • Improved sensitivity and low end response over previous slim subwoofer offerings
              • 45oz magnet
              • DVVC Direct Vent Voice Coil Cooling
              • Now featured in PRXS110E loaded enclosures
              • 12" Power Reference Dual 4-Ohm Shallow Mount Subwoofer
              • Documentation
              • injection-molded polypropylene cone
              • power handling: 50-400 watts RMS (200 watts per coil)
              • 800 watts peak power handling
              • sensitivity: 83.6 dB
              • Power Handling Peak: 2200 watts
              • Power Handling RMS: 1100 watts
              • Vented cast aluminum
              • 4-layer copper wound voice coil
              • 3" High temperature aluminum voice coil former
              • Fiberglass reinforced cone
              • Stitched rubber surround
              • 12" 2200W Peak Dual 4-Ohm Subwoofer
              • Documentation
              • 10" 2-ohm subwoofer
              • Injection-molded polypropylene cone with Santoprene rubber surround
              • Power handling: 400 watts RMS
              • Peak power handling: 800 watts
              • Sensitivity: 87.2 dB
              • Top-mount depth: 4-1/4"
              • Sealed box volume: 0.8 - 3.0 cu. ft.
              • Ported box volume: 1.25 - 1.75 cu. ft.
              • One 10" Subwoofer
              • Metal clearance plate
              • Kicker logo sticker
              • Manual (English/ Spanish/ German/ French)
              • Template on box
              • Plus One™ Woofer Cones
              • Convertible Design
              • Perimeter Illumination
              • SSI (Switch-Selectable Impedance)
              • Mylar Tweeters with Integrated Grilles
              • One-piece Polymer basket
              • High Sensitivity
              • Harman Standard Reliability Testing
              • 10" Marine Woofer
              • Documentation
              • Single 12” MOJO Subwoofer
              • 3.5” aluminum voice coil
              • Double stitched rubber surround
              • Side port enclosures design
              • Carpet wrapped enclosure
                • 12" Ported Enclosed MOJO 4-Ohm Subwoofer
                • Documentation
                • 8" Woofer with SINGLE 4 ohm Voice Coil
                • 400 Watts MAX 200 Watts RMS Power Handling
                • RCA & Speaker Level Inputs, High Level Inputs
                • Thermal, Short and Overload Protection Circuits, Power & Protection LEDs
                • Phase Control, Low Pass Crossover, Variable Bass Boost, Input Gain Control
                • S/N Ratio> 90 dB, Frequency Response 20Hz to 200Hz
                • Remote Subwoofer Control
                • Elite - 8 inch SINGLE Voice Coil (4 Ohm) 400W Subwoofer with Enclosure
                • Documentation
              ×
              ×

              Validating Credit Card...

              It will not be processed until the offer is accepted by a merchant.

              Notifying Retailers...

              Notifying our merchants and checking to see if they accept this offer.

              Offer Submitted!

              ×
              3-digit code in the back of your credit card
              ×
              ×
              ×
              ×
              ×
              ×