SHOP ALL

Yamaha EMX2 10-Input Powered Mixer

Name: Yamaha EMX2 10-Input Powered Mixer
Brand: Yamaha
SKU: GT-0147142
Price: 449.0 USD
Availability: OutOfStock

Model: EMX2

1/1

Integrated 500 W Power Amplifier
Four Mono Mic/Line Inputs
Three Stereo Inputs
Hi-Z Input on Channel 4
Independent Monitor Output
3-Band EQ on Each Channel
Master EQ for Music Playback or Speech
Integrated Feedback Suppressor
Built-In Reverb

Authorized RetailersManufacturer warranty included

New Products OnlyWe never sell used merchandise

Free ShippingOn most items

30 Days Returns*Minimum return policy

Consumer Reporter Lynda Baquero shows a website where you can bid on the items you want, from the manufacturer of choice, and known within a day or two if your offer is accepted.

View Article“Consumer Reporter Lynda Baquero shows a website where you can bid on the items you want, from the manufacturer of choice, and known within a day or two if your offer is accepted.”

swperk

5/5

Great selection, great prices, fast shipping!

"I found just the TV I was looking for at the best price! Easy to make the purchase, and the TV is brand new with a full factory warranty. Shipping was lightning-fast and the TV shipping box was packed inside another box, so it arrived in perfect condition. Highly recommended!"View article

1ezbuyer

5/5

Great Prices and Great Experience

"I’ve purchased two TVs through Greentoe, and both experiences have been excellent. Best prices I could find anywhere, and both TVs were delivered right to my door without any issues. My only mistake was forgetting that Greentoe offers a lot more than just TVs! I recently purchased applioances elsewhere and afterward realized I should have checked Greentoe first. Greentoe will definitely be one of the first places I check before making a major purchase. Let's get the word out, and let the free market dictate prices. Craig Barton Scottsdale AZ"View article

Specifications

Loudspeaker Outputs

Connectors	Speakers L/R: 1/4" / 6.35 mm phone jack
Output Level	4 Ohm Speakers: 110 W (1 Hz THD+N 8 Ohm Speakers: 110 W (1 Hz THD+N
Impedance	Actual Source Impedance: For Use with Nominal: 4 Ohm speakers, 8 Ohm speakers

General Specifications

Weight	9.3 lb / 4.2 kg
Phantom Power	Channels 1, 2: +30 V
Footswitch Input	Reverb: Effect mute on/off
Protection	Load Protection: DC-fault Amplifier Protection: Over heat protection, over current protection
Power	Power Requirements: 100-240 VAC, 50/60 Hz Power Consumption: 35 W (Idle) / 90 W (1/8 power)
Operating Temperature	32 to 104°F / 0 to 40°C
Dimensions (W × H × D)	14.8 x 5.8 x 8.7" / 37.6 x 14.7 x 22.1 cm
Output Power	1 kHz THD+N 1 kHz THD+N
Frequency Response	Frequency Response Refer to the nominal output level @ 1 kHz Input to Speakers: +1/-4 dB (40 Hz to 20 kHz) Input to Monitor Out: +0.5/-1.5 dB (20 Hz to 20 kHz)
THD + N	Input to Speakers: 0.2% @ 13.8 W (40 Hz to 20 kHz), 0.4% @ 23.2 W (1 kHz) Input to Monitor Out: 0.05% @ +10 dBu (20 Hz to 20 kHz), 0.009% @ +20 dBu (1 kHz)
EIN	Equivalent Input Noise: -115 dBu
Residual Output Noise	Input to Speakers: -68 dBu (40 Hz to 20 kHz, Master: min) Input to Monitor Out: -99 dBu (20 Hz to 20 kHz, Monitor: min)
Crosstalk	(1 kHz): -80 dB
Input Channels	Mono (Mic/Line): 4 Stereo: (Line): 3 Total: 10
Output Channels	Speakers: L/R Monitor Out: L/R Subwoofer Out
Bus	Stereo: 1 Bus: 1
Pad	Channels 1-4: 26 dB
Hi-Z Input	Channel 4: Supported
EQ Section	High: 8 kHz +15/-15 dB Mid: 2.5 kHz +15/-15 dB Low: 100 Hz +15/-15 dB
Audio Level Meter	6 points (-20, -6, 0, +3, +6, LIMITER)
Built-in Effects	SPX Algorithm: Reverb 4 programs
Output Channel Function	Master EQ (Speech to Music) Feedback Suppressor

Analog Output Characteristic

Impedance	Actual Source Impedance: 150 Ohms For use with Nominal: 10 kOhms lines
Output Level	Monitor Out L/R: +4 dBu (1.23 V) nominal, +20 dBu (7.75 V) max before clip Subwoofer Out: -3 dBu (0.55 V) nominal, +17 dBu (5.49 V) max before clip
Output Connectors	Monitor L/R: 1/4" / 6.35 mm phone jack (impedance balanced) Subwoofer Out: 1/4" / 6.35 mm phone jack (impedance balanced)

Analog Input Characteristics

Input Level	Sensitivity Channel 1-4 (XLR, Mic): -56 dBu (1.228 mV) Channel 1-4 (XLR, Line): -30 dBu (24.51 mV) Channel 3/4 (1/4", Mic): -50 dBu (2.451 mV) Channel 3/4 (1/4", Line): -24 dBu (48.90 mV) Channels 5/6 to 9/10: -24 dBu (48.90 mV) Nominal Channel 1-4 (XLR, Mic): -35 dBu (13.78 mV) Channel 1-4 (XLR, Line): -9 dBu (275.0 mV) Channel 3/4 (1/4", Mic): -29 dBu (27.50 mV) Channel 3/4 (1/4", Line): -3 dBu (548.7 mV) Channels 5/6 to 9/10: -3 dBu (548.7 mV) Maximum Before Clip Channel 1-4 (XLR, Mic): -10 dBu (245.1 mV) Channel 1-4 (XLR, Line): +16 dBu (4.890 V) Channel 3/4 (1/4", Mic): -4 dBu (489.0 mV) Channel 3/4 (1/4", Line): +22 dBu (9.757 V) Channels 5/6 to 9/10: +22 dBu (9.757 V)
Load Impedance	Channel 1-4 (XLR): 3 kOhms actual, 150 Ohms nominal with mics Channel 3/4 (1/4", Hi-Z Engaged): 1 MOhms actual, 10 kOhms lines nominal Channel 3/4 (1/4", Hi-Z Disengaged): 3 MOhms actual, 150 Ohms lines nominal Channels 5/6 to 9/10: 10 kOhms actual, 150 Ohms lines
Input Connectors	Channels 1/2: 2x XLR Channels 3/4: 2x Combo XLR-1/4" / 6.35 mm Channels 5/6: 2x 1/4" / 6.35 mm Channel 7/8: 2x 1/4" / 6.35 mm or 2x RCA Channel 9/10: 2x 1/4" / 6.35 mm or 1x 1/8" / 3.5 mm stereo mini-jack

Product Highlights

Integrated 500 W Power Amplifier
Four Mono Mic/Line Inputs
Three Stereo Inputs
Hi-Z Input on Channel 4
Independent Monitor Output
3-Band EQ on Each Channel
Master EQ for Music Playback or Speech
Integrated Feedback Suppressor
Built-In Reverb
Compatible with 4 and 8 Ohm Speakers

Yamaha EMX2 10-Input Powered Mixer

Model: EMX2

Product Unavailable

Product Highlights