- All Products are New and from Manufacturer Authorized Retailers
- 30 day return policy
No Additional Fees
We are sorry. At this time, we are not accepting offers on this product. Please click the button below to be notified when our retailers get it back in stock.
|Transducer||Externally Biased Condenser|
|Frequency Response||20Hz to 20kHz|
|Dynamic Range (Typical)||2500 ohm load: 123dB
1000 ohm load: 118dB
|Signal-to-Noise Ratio||80dB difference between 94dB SPL and equivalent SPL of self-noise A-weighted.|
|Maximum Input Sound Level||2500 ohm load (Attenuator on): 137dB (152dB)
1000 ohm load (Attenuator off): 132dB (147dB)
|Power Requirements||48VDC +/- 4VDC|
|Output Impedance||EIA Rated at 150 ohms (140 ohms actual)|
|Output Connectors||3-Pin XLR|
|Low Frequency Roll-Off||Flat
-6dB/octave below 115Hz -18dB/octave below 80Hz
|Dimensions (LxDiameter)||6.15 x 2.08" (156.2 x 53.0mm)|
|Weight||22.6 oz (642g)|
Fits perfect my Shure Beta and pedestal
Connectivity, Durability, Ease of Use, Features
I use a double vocal mic set up and play guitar at the same time. For years I had my SM520 Bullet mounted with hose clamps and other crazy things until I found the A27SM mount from SHURE.
Connectivity, Durability, Ease of Use, Features, Pro look on stage, Sound Quality
This is the best mic mount for small microphones. It is built very well; all metal. It has some weight. Mounts vertically two microphones for A-B/X-Y orientation.It is also pricey, but worth it!
Connectivity, Durability, Ease of Use, Sound Quality