Shure QLXD4 Digital Wireless Receiver (H50: 534 to 598 MHz)

Name: Shure QLXD4 Digital Wireless Receiver (H50: 534 to 598 MHz)
Brand: Shure
SKU: GT-0135360
Price: 679.0 USD
Availability: OutOfStock

Model: QLXD4-H50

1/2

24-Bit Digital Audio
AES-256-Bit Encryption
More the 60 Channels per Frequency Band
Automatic Channel Scan
Built-In Switching Diversity
20 Hz to 20 kHz Frequency Range
LCD Display
Network Control
XLR and 1/4" Outputs

Authorized RetailersManufacturer warranty included

New Products OnlyWe never sell used merchandise

Free ShippingOn most items

30 Days Returns*Minimum return policy

"I don’t say this often, but there’s a new app that just might dramatically change the way you shop, and it’s called Greentoe."View article

Reviewer1655329426

5/5

Easy!

"Great price and easy to use. Will definitely buy from again. "View article

1ezbuyer

5/5

Great Prices and Great Experience

"I’ve purchased two TVs through Greentoe, and both experiences have been excellent. Best prices I could find anywhere, and both TVs were delivered right to my door without any issues. My only mistake was forgetting that Greentoe offers a lot more than just TVs! I recently purchased applioances elsewhere and afterward realized I should have checked Greentoe first. Greentoe will definitely be one of the first places I check before making a major purchase. Let's get the word out, and let the free market dictate prices. Craig Barton Scottsdale AZ"View article

Specifications

System Specifications

RF Carrier Frequency Range	H50: 534 to 598 MHz
Working Range	328' (100 m) Note: Actual range depends on RF signal absorption, reflection and interference
RF	Tuning Step Size: 25 kHz, varies by region
Image Rejection	Greater than 70 dB, typical
RF Sensitivity	−97 dBm at 10-5 BER
Latency	Less than 2.9 ms
Audio Frequency Response	QLXD1: 20 Hz - 20 kHz (±1 dB) QLXD2: Dependent on microphone type
Audio Dynamic Range	System Gain @ +10: Greater than 120 dB, A-weighted, typical
Total Harmonic Distortion (THD)	−12 dBFS Input, System Gain @ +10: Less than 0.1%
Polarity	System Audio: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 6.35 mm (1/4-inch) output
Operating Temperature Range	0 to 122°F (-18 to 50°C) Note: Battery characteristics may limit this range
Storage Temperature Range	-20 to 165°F (-29 to 74°C) Note: Battery characteristics may limit this range.

Receiver

Housing	Steel
RF Input	Spurious Rejection: Greater than 80 dB, typical Connector Type: BNC Impedance: 50 ohms
Audio Output	Gain Adjustment Range: -18 to +42 dB in 1 dB steps Configuration: 1/4" (6.35 mm), Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Balanced (1=ground, 2=audio +, 3=audio −) Impedance 1/4" (6.35 mm), 100 ohms (50 ohms Unbalanced) XLR: 100 ohms Full Scale Output: 1/4" (6.35 mm), +12 dBV XLR: LINE setting= +18 dBV, MIC setting= −12 dBV Mic/Line Switch: 30 dB pad Phantom Power Protection: 1/4" (6.35 mm), Yes XLR: Yes
Networking	Network Interface: Single Port Ethernet 10/100 Mbps Network Addressing Capability: DHCP or Manual IP address Maximum Ethernet Cable Length: 328' (100 m)
Power Requirement	12 VDC @ 0.4 A, supplied by external power supply (tip positive)
Dimensions (H x W x D)	1.63 x 7.75 x 5.94" (41 x 197 x 151 mm)
Weight	1.71 lb (777 g)

Packaging Info

Package Weight	8.15 lb
Box Dimensions (LxWxH)	19.4 x 17.5 x 4.1"

24-Bit Digital Audio
AES-256-Bit Encryption
More the 60 Channels per Frequency Band
Automatic Channel Scan
Built-In Switching Diversity
20 Hz to 20 kHz Frequency Range
LCD Display
Network Control
XLR and 1/4" Outputs

Shure QLXD4 Digital Wireless Receiver (H50: 534 to 598 MHz)

Model: QLXD4-H50

Product Unavailable