ClickCease

Shure QLXD14/84 Lavalier Wireless Microphone System (H50: 534 to 598 MHz)

Model #QLXD14/84-H50

Shure Warranty
Shure qlxd14 84 h50 1
Shure qlxd14 84 h50 1
Shure qlxd14 84 h50 2
How it works
  • You name the price you want to pay for a product.
  • We send your offer to a network of Certified Retailers.
  • If the retailer likes your offer, you get that price for the product.
Greentoe Guarantee
  • Guaranteed Brand New Products
  • All Products Sold by Manufacturer Authorized Retailers
  • 30 Day Return Policy
  • Free Shipping
    No Additional Fees

Product Back-Ordered

We are sorry. At this time, we are not accepting offers on this product. Please click the button below to be notified when our retailers get it back in stock.

Thank you! We will be in touch. Something went wrong. Please try again later.
Specifications

System Specifications

RF Carrier Frequency Range H50: 534 to 598 MHz
Working Range 330' (100 m) Note: Actual range depends on RF signal absorption, reflection and interference
Image Rejection Greater than 70 dB, typical
RF Tuning Step Size: 25 kHz, varies by region
RF Sensitivity -97 dBm at 10-5 BER
Latency Less than 2.9 ms
Audio Frequency Response QLXD1: 20 Hz - 20 kHz (±1 dB)
Audio Dynamic Range System Gain @ +10: Greater than 120 dB, A-weighted, typical
Total Harmonic Distortion (THD) -12 dBFS Input, System Gain @ +10: Less than 0.1%
Polarity System Audio: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 1/4" (6.35 mm) output
Operating Temperature Range 0 to 122°F (-18 to 50°C) Note: Battery characteristics may limit this range
Storage Temperature Range -20 to 165°F (-29 to 74°C) Note: Battery characteristics may limit this range.

Receiver

RF Input Spurious Rejection: Greater than 80 dB, typical Connector Type: BNC Impedance: 50 ohms
Housing Steel
Power Requirement 12 VDC @ 0.4 A, supplied by external power supply (tip positive)
Audio Output Gain Adjustment Range: -18 to +42 dB in 1 dB steps Configuration: 1/4" (6.35 mm), Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Balanced (1=ground, 2=audio +, 3=audio -) Impedance 1/4" (6.35 mm), 100 ohms (50 ohms Unbalanced) XLR: 100 ohms Full Scale Output: 1/4" (6.35 mm), +12 dBV XLR: LINE setting= +18 dBV, MIC setting= -12 dBV Mic/Line Switch: 30 dB pad Phantom Power Protection: 1/4" (6.35 mm), Yes XLR: Yes
Networking Network Interface: Single Port Ethernet 10/100 Mbps Network Addressing Capability: DHCP or Manual IP address Maximum Ethernet Cable Length: 328' (100 m)
Dimensions (H x W x D) 1.63 x 7.75 x 5.94" (41 x 197 x 151 mm)
Weight 1.71 lb (777 g)

Microphone

Model WL184 with TA4F connector

Bodypack Transmitter

Mic Offset Range 0 to 21 dB (in 3 dB steps)
Battery Type Shure SB900 rechargeable Li-Ion or AA batteries 1.5 V
Battery Runtime At 10 mW: Shure SB900: up to 10 hours Alkaline: up to 9 hours
Housing Cast aluminum
RF Output Connector: SMA Antenna Type: 1/4 wave Impedance: 50 Ω Occupied Bandwidth: Less than 200 kHz Modulation Type: Shure proprietary digital Power: 1 mW or 10 mW Varies by region
Dimensions (H x W x D) 3.38 x 2.57 x 0.92" (86 x 65 x 23 mm)
Weight 4.9 oz (138 g), without batteries
Audio Input Connector: 4-pin male mini connector (TA4M) Configuration: Unbalanced Impedance: 1 MOhm Maximum Input Level 1 kHz at 1% THD: 8.5 dBV (7.5 Vpp) Preamplifier Equivalent Input Noise (EIN) System Gain Setting ≥ +20: -120 dBV, A-weighted, typical
Product Highlights
  • 20 Hz to 20 kHz Frequency Range
  • 24-Bit Digital Audio
  • Network Control
  • AES-256 Encryption
  • Built-In Switching Diversity
  • Automatic Channel Scan
  • More than 60 Channels per Frequency Band
  • Includes WL184 Microphone
  • Power Supply is Included
  • Includes Rackmount Hardware
In The Box
  • Shure QLXD14/84 Lavalier Wireless Microphone System (H50: 534 to 598 MHz)
  • QLXD4 Digital Wireless Receiver (H50: 534 to 598 MHz)
  • QLXD1 Wireless Bodypack Transmitter (534 to 598 MHz)
  • WL184 Supercardioid Lavalier Microphone
  • Limited 2-Year Warranty
Still Have Questions?
We can help via Live Chat, Email or you can call us 1-888-840-0464

Opps!

Please log in or sign up to continue

×
×
×

Validating Credit Card...

It will not be processed until the offer is accepted by a merchant.

Notifying Retailers...

Notifying our merchants and checking to see if they accept this offer.

Offer Submitted!

×
3-digit code in the back of your credit card
×
×
×
×
×
×