Shure QLXD14/83 Lavalier Wireless Microphone System (X52: 902 to 928 MHz)

Model #QLXD1483-X52

Shure Warranty
Shure qlxd1483 x52 1
Shure qlxd1483 x52 1
How it works
  • You name the price you want to pay for a product.
  • We send your offer to a network of Certified Retailers.
  • If the retailer likes your offer, you get that price for the product.
Greentoe Guarantee
  • All Products are New and from Manufacturer Authorized Retailers
  • 30 day return policy
  • Free Shipping
    No Additional Fees

Name your price

ON A BRAND NEW Shure QLXD1483-X52

ENTER YOUR PRICE

$
Your Chances of Success
lowest price online $
average price online $

Your chances of success

Specifications

System Specifications

Working Range 330' (100 m) Note: Actual range depends on RF signal absorption, reflection and interference
RF Tuning Step Size: 25 kHz, varies by region
RF Carrier Frequency Range X52: 902 to 928 MHz
Image Rejection Greater than 70 dB, typical
RF Sensitivity -97 dBm at 10-5 BER
Latency Less than 2.9 ms
Audio Frequency Response QLXD1: 20 Hz - 20 kHz (±1 dB)
Audio Dynamic Range System Gain @ +10: Greater than 120 dB, A-weighted, typical
Total Harmonic Distortion (THD) -12 dBFS Input, System Gain @ +10: Less than 0.1%
Polarity System Audio: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 1/4" (6.35 mm) output
Operating Temperature Range 0 to 122°F (-18 to 50°C) Note: Battery characteristics may limit this range
Storage Temperature Range -20 to 165°F (-29 to 74°C) Note: Battery characteristics may limit this range.

Receiver

RF Input Spurious Rejection: Greater than 80 dB, typical Connector Type: BNC Impedance: 50 ohms
Housing Steel
Power Requirement 12 VDC @ 0.4 A, supplied by external power supply (tip positive)
Audio Output Gain Adjustment Range: -18 to +42 dB in 1 dB steps Configuration: 1/4" (6.35 mm), Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Balanced (1=ground, 2=audio +, 3=audio -) Impedance 1/4" (6.35 mm), 100 ohms (50 ohms Unbalanced) XLR: 100 ohms Full Scale Output: 1/4" (6.35 mm), +12 dBV XLR: LINE setting= +18 dBV, MIC setting= -12 dBV Mic/Line Switch: 30 dB pad Phantom Power Protection: 1/4" (6.35 mm), Yes XLR: Yes
Networking Network Interface: Single Port Ethernet 10/100 Mbps Network Addressing Capability: DHCP or Manual IP address Maximum Ethernet Cable Length: 328' (100 m)
Dimensions (H x W x D) 1.63 x 7.75 x 5.94" (41 x 197 x 151 mm)
Weight 1.71 lb (777 g)

Microphone

Model WL183 with TA4F connector

Bodypack Transmitter

Mic Offset Range 0 to 21 dB (in 3 dB steps)
Battery Type Shure SB900 rechargeable Li-Ion or AA batteries 1.5 V
Battery Runtime At 10 mW: Shure SB900: up to 10 hours Alkaline: up to 9 hours
Housing Cast aluminum
RF Output Connector: SMA Antenna Type: 1/4 wave Impedance: 50 Ω Occupied Bandwidth: Less than 200 kHz Modulation Type: Shure proprietary digital Power: 1 mW or 10 mW Varies by region
Dimensions (H x W x D) 3.38 x 2.57 x 0.92" (86 x 65 x 23 mm)
Weight 4.9 oz (138 g), without batteries
Audio Input Connector: 4-pin male mini connector (TA4M) Configuration: Unbalanced Impedance: 1 MOhm Maximum Input Level 1 kHz at 1% THD: 8.5 dBV (7.5 Vpp) Preamplifier Equivalent Input Noise (EIN) System Gain Setting ≥ +20: -120 dBV, A-weighted, typical
Product Highlights
  • 20 Hz to 20 kHz Frequency Range
  • 24-Bit Digital Audio
  • Network Control
  • AES-256 Encryption
  • Built-In Switching Diversity
  • Automatic Channel Scan
  • More than 60 Channels per Frequency Band
  • Includes WL183 Microphone
  • Power Supply is Included
  • Includes Rackmount Hardware
Still Have Questions?
We can help via Live Chat, Email or you can call us 1-888-840-0464

Opps!

Please log in or sign up to continue

×
×
×

Validating Credit Card...

It will not be processed until the offer is accepted by a merchant.

Notifying Retailers...

Notifying our merchants and checking to see if they accept this offer.

Offer Submitted!

×
3-digit code in the back of your credit card
×
×
×
×
×
×