

Shure GLXD1 Bodypack Transmitter (Z2 Band: 2400 - 2483.5 MHz)
Model: GLXD1-Z2








| Package Weight | 0.95 lb |
|---|---|
| Box Dimensions (LxWxH) | 11.024 x 5.433 x 3.228" |
| Range of Operation | 200' (60 m) (typical, depends on RF signal absorption, reflection, and interference) |
|---|---|
| Transmit Mode | Frequency Hopping |
| Frequency Response | 20 Hz to 20 kHz |
| Dynamic Range | 120 dB, A-weighted |
| RF Sensitivity | -88 dBm, typical |
| Total Harmonic Distortion | 0.2%, typical |
| RF Output | 10 mW E.I.R.P, maximum |
| Operating Temperature Range | 0° to 135°F (-18° to 57°C) |
| Storage Temperature Range | -20° to 165°F (-29° to 74°C) |
| Connector | 1x Unbalanced 4-pin TA4M male mini-connector |
| Battery Life | Up to 16 hours |
| Power Requirements | 3.7 V Rechargeable Li-Ion |
| Input Impedance | 900 kΩ |
| RF Output | 10 mW E.I.R.P. maximum |
| Maximum Input Level | 1 kHz at 1% THD8.4 dBV (7.5 Vp-p) |
| Antenna | Internal Monopole |
| Pin Configuration | 1: ground (cable shield)2: +5 V bias3: Audio4: Tied through active load to ground (On instrument adapter cable, pin 4 floats) |
| Housing | Cast Metal |
| Dimensions (H x W x D) | 3.56 x 2.54 x 0.90" (90.4 x 64.5 x 22.9 mm), without antenna |
| Polarity | Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low-impedance output) and the tip of the high impedance 1/4-inch output |
| Tuning Frequency Range | 2400 to 2483.5 MHz |