The equipment is just right and what we needed. What I really appreciate is the polite service you gave to help me get what I needed without knowing exactly what it was! Thank you for your help and service and well as the equipment.

This is an excellent microphone. Normally a little pricey. Due to its size the microphone is easily broken. The normal failure points are at the base of the microphone element and at the top of the connector. These are the failure points for the cable.

We have used these for years. They have not given any trouble, except that the users eventually wear out the cable at the connector boot, or pull it apart. Never has a mic head failed. We will continue to use these with our wireless mic setup.

Don't get me wrong, this is a great mic! IF there are no speakers anywhere near the speaker. It picks up everything around it, DUH! (Omni-Directional) but feedback is a huge issue if you are using floor monitors or the person speaking stands anywhere near or in front of the mains.

I have seen the new AVX system at an Audio-Visual Expo and I asked a few questions about it. I made some research online and also watched videos about its performance. Therefore, I decided to purchase a pair of the system from Sweetwater.

I've been doing small budget style video content for about three years, and one of the biggest challenges has always been audio. Having a great mic that integrates directly into your video recording is super essential for small teams and quick edits.

Like many folks in the video business, we are sweating the wireless mic frequency changes being made by the FCC. Considering the thousands of dollars we invested in Lectrosonics Wireless Microphones over 10 years ago, we had some big decisions to make.

Very nice replacement mic. It actually sounds better than the original.

This product was purchased to replace another Sennheiser mic that failed. It works as expected. The quality is very good.

The Sennheiser ew100 G3 series mic packs are great. My only issue is that the cable for the mic is easily destroyed. With a few bends back and forth at either end, you'll start to see the internal copper wires and eventually it frays and stops working.