- All Products are New and from Manufacturer Authorized Retailers
- 30 day return policy
- Free Shipping
No Additional Fees
|Package Weight||29.6 lb|
|Box Dimensions (LxWxH)||24.0 x 14.5 x 6.0"|
|Input Sensitivity||1.2 Vrms|
|Input Impedance||Greater than 20k (balanced)|
|Frequency Response||20Hz - 20kHz, +0, -1 dB|
|Total Harmonic Distortion (THD)||8 ohms: less than 0.05%4 ohms: less than 0.1%|
|Input Connections||3-pin XLR and 1/4" TRS, balanced, parallelPhono, unbalanced|
|Output Connectors||Speakon, 1/4", Binding Posts|
|Power Rating||8 ohms / 1 kHz (both channels driven): 300W8 ohms / 1 kHz (single channels driven): 350W4 ohms / 1 kHz (both channels driven): 425W4 ohms / 1 kHz (single channels driven): 500W|
|Controls (Rear)||Full Range / Crossover switch100 Hz, 3rd order LP (sub), 2nd order HP (top)|
|Indicators||Red Clip LEDs, proportional, 0.1% THD thresholdGreen Signal LEDs, threshold -35 dBBlue Power LED, AC on|
|Cooling||Not Specified By Manufacturer|
|Power Consumption||0.2 AC Amps, 44 per hour idleUL, CE, RoHS/WEEE Compliant|
|Power Requirements||1/8 power, pink noise at 4 ohms, 120V 6.3A|
|Dimensions (WxHxD)||19 x 3.5 10.1" (483 x 89 x 257mm)|
|Weight||26 lbs (12 kg)|
|Specialties||Subwoofer/Satellite crossover built-in|
|Controls Front Panel||Gain controls, 21 detentsRed Clip LEDs, proportional, 0.1% THD thresholdGreen Signal LEDs, threshold -35 dBBlue Power LED, AC on|
|Damping Factor||Not Specified By Manufacturer|
I am a physicist. (energy physics not matter physics). I am also a sound engineer, coincidentally, the control of sound energy. This amp is VERY GOOD for bench testing audio control devices and speakers. The addition of an unbalanced input makes it very handy for typical bench tests.
This amp sounded great, and produced just the kind of power I was looking for. My only issue with it was that the fan is really noisey, if you have a sound proof cabinet you will be fine but if not, this amp will distract you
Great device, easy setup. Good true sound produced by the amplifier. The only little thing is that if you put out a low volume, you hear the cooling fan running.
This amplifier has the power and quality I was looking for.It is also much lighter than the old amplifier that it replaced.
I am the facility director at a large health club.... We have used this brand amplifier in our Spinning, Yoga and Aerobics studios... When paired up with a Shure wireless mic and a rolls mixer you will have Great long lasting pro audio
Bought this to replace an old amp with a bad channel. Used for overflow speakers in our church lobby ceiling. Inputs and outputs were totally compatible with our system's existing wiring, making it a simple hook-up. It worked perfectly right out of the box.
As noted in other reviews the fan is a bit noisy. In my case that's not a big deal as my amps & other equipment are in a separate room from the home theater but it's definitely audible if you're near the rack.
Low cost, high power
Purchased three years ago, I do not regret it. The sound is good, the device compact, rack mountable in 19 'and has a connector adapted to (almost) all possibilities. Only drawback, at a party, it is put repeatedly safe (both channels) while he was on for a short time and at half power.
Very good amp, many possible connections, compact and in rack 19 '.
Quiet Powerful Installation sound Any sound amp needs