



Qsc CX-204V 4 Channel Power Amplifier (70V)
Model: CX204V








| Package Weight | 27.0 lb |
|---|---|
| Box Dimensions (LxWxH) | 24.0 x 18.0 x 6.0" |
| Input Sensitivity | 1.26 Vrms |
|---|---|
| Gain Control Range | 35 dB at 70.7 V |
| Input Clipping Level | 10 Vrms (+22 dBu) |
| Output Circuit | AB |
| Distortion | SMPTE-IM: <0.02% Typical: 20 Hz to 20 kHz: 0.01 % THD (10 dB Below Rated Power) 1.0 kHz and Below: < 0.01% THD (Full Rated Power) |
| Frequency Response | 20 Hz to 20 kHz: ±0.2 dB 8 Hz to 50 kHz: +0/-3 dB |
| Damping Factor | >500 (1 kHz and Below) |
| Input Impedance | 6 kOhm Unbalanced, 12 kOhm Balanced |
| Stereo Output | 70 V 20 Hz to 20 kHz 0.05% THD: 200 W 70 V 1 kHz 0.05% THD: 220 W 70 V 1 kHz 1% THD: 300 W |
| Connectors | Input: 4 x 3-Position Euro-Style Detachable Barrier Block, Ch 1, 2, 3 & 4 DataPort: 2 x HD-15 Connector, Ch 1+2, Ch 3+4 Output: 2 x Six-Position Barrier Strips, Ch 1+2, Ch 3+4 |
| Amplifier Protection | Full Short Circuit, Open Circuit, Thermal, Ultrasonic, and Protection. Stable into Reactive or Mismatched Loads |
| Load | Protection: On/off muting, DC-Fault Power Supply Protection |
| Indicators | Parallel Inputs: Red LED Bridged: Yellow LED Power-On: Green LED Clip/Prot: Red LED (1 per Channel) Level -10 dB: Yellow LED (1 per Channel) Level -20 dB: Yellow LED (1 per Channel) Signal -35 dB: Green LED (1 per Channel) |
| Controls | Front: 1 x AC Switch 4 x Gain Knobs: Ch. 1, 2, 3, 4 Rear: 2 x DIP Switches for Channels 1 & 2, Channels 3 & 4, Clip Limiter On/Off LF Filter On/Off LF Filter Frequency Select: 50 Hz or 75 Hz Inputs Mode: Parallel, Stereo, Bridge Mono |
| Power Requirements | 120 VAC, 50-60 Hz |
| Dimensions (L x H x D) | 19 x 3.5 x 14" / 48.3 x 8.9 x 35.6 cm |
| Weight | 21 lb / 9.5 kg |
| Cooling | Variable Speed Fan, Rear-to-Front Airflow Through Tunnel Heat Sink |
| Bridged Mono Output | 140 V 20 Hz to 20 kHz 0.1% THD: 400 W 140 V 1 kHz 0.05% THD: 440 W 140 V 1 kHz 1% THD: 600 W |