Peavey KB 5 150W 2x10 4-Channel Keyboard Amp

Model: 00573260

PEAVEY Warranty

Peavey KB 5 150W 2x10 4-Channel Keyboard Amp

How it works

You name the price you want to pay for a product.
We send your offer to a network of Certified Retailers.
If the retailer likes your offer, you get that price for the product.

Greentoe Guarantee

Guaranteed Brand New Products

All Products Sold by Manufacturer Authorized Retailers

30 Day Return Policy

Guaranteed Brand New Products
All Products Sold by Manufacturer Authorized Retailers
30 Day Return Policy

Product Unavailable

We are sorry. At this time, we are not accepting offers on this product.

Product Description

The KB 5 was designed as a personal PA system in a keyboard amp. The KB 5 features separate inputs on each channel and can easily handle voice, microphones and other instruments, including acoustic and electric guitars, drum machines and backing machines, such as CD and DAT players. Other essential features include stereo effects loop, ground lift, master level, XLR balanced stereo line out, DDT defeat switch and the capability to drive an external speaker.

PREAMP SECTION
The following preamp specs are
measured @ 1 kHzâ nominal signal
levels are with channel level controls
set at 5â minimum levels are with
channel level controls set at 10.
Channel 1â 2 and 3 inputs:
Input Impedance: 100Kâ Left/Mono
Nominal Input Level: -22 dBVâ 79 mV RMS
Minimum Input Level: -40 dBVâ 10 mV RMS
Nominal Input Level: -15 dBVâ 178 mV RMS
Minimum Input Level: -33 dBVâ 22 mV RMS
Channel 4 input:
Low Z Input Impedance: 5 k Ohms
Nominal Input Level: -28 dBVâ 40 mV RMS
Minimum Input Level: -48 dBVâ 4 mV RMS
High Z Input Impedance: 100 lâ Left
Nominal Input Level: -5 dBVâ 560 mV RMS
Minimum Input Level: -22 dBVâ 79 mV RMS
Right: -1 dBVâ 1.1 V RMS
Minimum: -16 dBVâ 158 mV RMS
Headphone output
Load Impedance: 8 Ohms or greater
Nominal Output: 100 mW RMS
Main line out
Output Impedance: <100
Output Level: 18 dBV
POWER AMPLIFIER SECTION
Rated power and load:
200 Watts RMS/4 Ohms or 150 Watts
RMS/8 Ohms with DDT off
(1 kHz, 1% THD @ 120 VAC line)
Frequency response:
+0, -1dB, 20Hz-20kHz @ 100 Watts RMS/
8 Ohms
Total harmonic distortion:
Less than 0.01% @ 1 kHz/8 Ohms
Typically less than 0.08%â 20 Hz-20kHz
DDT dynamic range:
Greater than 20 dB
DDT maximum THD:
Below 0.5% THD for 6 dB overload
Below 1% THD for 20 dB overload
Hum and noise:
Greater than 100 dB below rated power
Power consumption:
300 Watts @ 120V ACâ 50/60 Hzâ domestic
300 Watts @ 220-230/240V ACâ 60 Hzâ export

150 watts/200 watts with external speaker
Stereo mixer with 2-band EQ and main effects send/return
Mic/line channel with 3-band EQ and effects send/return
Monitor input with level control and assign
Headphone out with level control
Built-in casters and handle for easy moving
Two 10 inch speakers and horn
Weight Unpacked: 85.80 lb(38.918 kg)
Weight Packed: 96.00 lb(43.545 kg)
Width Packed: 21.25"(53.975 cm)
Height Packed: 28.25"(71.755 cm)