Memphis Audio 6-3/4 inch Component Speaker System
Model: PRX60C
Make an Offer!MSRP:
$199.95
Responses in minutes
Fast shipping
- Component speaker system includes two 6-3/4" woofers, 2 tweeters, 2 external crossovers
- Polypropylene woofer with polyurethane surround
- Separate polypropylene dome tweeter
- 2-way external crossover
- Handles up to 50 watts RMS (100 watts peak power)
- Frequency response: 72-20,000 Hz
- Sensitivity: 88 dB
- Woofer mounting depth: 2-1/2"
- Woofer grilles included
- 2 Woofers
- 2 Tweeters (with attached 16" wire terminated with quick-slide connectors)
- 2 Crossovers
- 2 Adhesive backed Memphis Audio logos (packaged with the crossovers)
- 2 Woofer grilles
- 2 Flush mount housings (with tweeters installed)
- 2 Flush mount retaining rings
- 2 Angled surface mount housings
- Two 6' Crossover input wires (tinned bare wire on both ends)
- Two 12' Tweeter wires (quick slides on one end and tinned bare wire on the other)
- Two 12' Woofer wires (quick slides on one end and tinned bare wire on the other)
- Eight 1-3/8" Pan head screws
- 8 Speed clips
- Four 3/4" Flat-head screws
- Tweeter installation instructions
- Template
Authorized RetailersManufacturer warranty included
New Products OnlyWe never sell used merchandise
Free ShippingOn most items
30 Days Returns*Minimum return policy
As Seen On...
"An E-Commerce Site Where You Can Haggle Down The Price"View article
What People Say...
- Component speaker system includes two 6-3/4" woofers, 2 tweeters, 2 external crossovers
- Polypropylene woofer with polyurethane surround
- Separate polypropylene dome tweeter
- 2-way external crossover
- Handles up to 50 watts RMS (100 watts peak power)
- Frequency response: 72-20,000 Hz
- Sensitivity: 88 dB
- Woofer mounting depth: 2-1/2"
- Woofer grilles included
- 2 Woofers
- 2 Tweeters (with attached 16" wire terminated with quick-slide connectors)
- 2 Crossovers
- 2 Adhesive backed Memphis Audio logos (packaged with the crossovers)
- 2 Woofer grilles
- 2 Flush mount housings (with tweeters installed)
- 2 Flush mount retaining rings
- 2 Angled surface mount housings
- Two 6' Crossover input wires (tinned bare wire on both ends)
- Two 12' Tweeter wires (quick slides on one end and tinned bare wire on the other)
- Two 12' Woofer wires (quick slides on one end and tinned bare wire on the other)
- Eight 1-3/8" Pan head screws
- 8 Speed clips
- Four 3/4" Flat-head screws
- Tweeter installation instructions
- Template