



Lewitt DGT 650 USB Microphone
Model: DGT 650








| Pad | Pre-Attention: 10 db 20 dB Switchable |
|---|---|
| Bass Cut Filter | Slope: 12 dB / octave at 80 Hz 12 dB / octave at 160 Hz |
| Dimensions | Transducer Diameter: 0.67" (17 mm) |
| Operating Principle | Pressure gradient transducer, permanently polarized, XY-stereo |
| Polar Pattern | Cardioid, XY-stereo |
| Frequency Range | 20 Hz to 20 kHz |
| Dynamic Range | Of Mic Amp: 110 dB-A |
| Frequency Response | 20 Hz to 20 kHz |
|---|---|
| Input Impedance | > 1 Meg Ω |
| Input Voltage | Full Scale: 8 dBu |
| Dynamic Range | 110 dB-A |
| Output Power | 40 mW at 16 Ω, |
|---|---|
| Total Harmonic Distortion (THD) | THD+N: |
| Frequency Response | 30 Hz to 20 kHz |
| Volume Control | Headphone: -60 dB to 0 dB |
| Recording Modes | 1: left / right = microphone X/Y 2: left / right = microphone cardioid 3: left / right = stereo line-in 4: left = microphone cardioid / right = line input left |
|---|---|
| Connector | 18-pin lockable hi-speed connector |
| Dimensions (L x W x H) | 5.43 x 2.04 x 1.42" (138 x 52 x 36 mm) |
| Weight | 10.9 oz (310 g) |
| Resolution | 24 bit |
| Sample Rates | 44,1 kHz 48 kHz 96 kHz |
| Current Consumption | |
| Gain | Master: 0 to 40 dB (analog) |
| Supply Voltage | USB high-power device 5 V (+/-5%) / internal battery |
| Internal Battery | Li-ion, 950mAh / 3,7V |
| Battery Run Time | > 3 hours playtime dedicated mini-USB charging port |