Gemini XGA-2000 Professional Power Amplifier
Model: XGA-2000
- You name the price you want to pay for a product.
- If the retailer likes your offer, you get that price for the product.
- Guaranteed Brand New Products
- All Products Sold by Manufacturer Authorized Retailers
- 30 Day Return Policy
-
Free Shipping
No Additional Fees
Packaging Info
Package Weight | 18.4 lb |
Box Dimensions (LxWxH) | 21.0 x 16.0 x 7.0" |
General Information
Input Sensitivity | 0.77 v |
Input Impedance | 20 kΩ |
Maximum Input Level | 21 dBv/9v |
Frequency Response | 10 to 50,000 Hz (±1.5 dB) |
Signal-to-Noise Ratio | >90 dB |
Total Harmonic Distortion (THD) | >0.1% |
Input Connections | 2x balanced XLR 2x balanced 1/4" 2x RCA input |
Power Rating | 2x 125W RMS at 4 Ω stereo 2x 90W RMS at 8 Ω stereo 250W RMS at 8 Ω bridged |
Controls Front Panel | Channel A gain Channel B gain |
Controls (Rear) | Stereo/Bridge switch |
Indicators | Signal, clip, protect, and bridge |
Cooling | Front to rear vents with cooling fan |
Fuse | AC 115 V/ 230 V at 50~60 Hz |
Dimensions | 19.0 x 13.8 x 3.5" (482.0 x 350.0 x 88.0 mm) |
Weight | 17.6 lb (8.0 kg) |
Output Connectors | 3x Speakon for channel A, channel B, and bridge 5-point binding banana posts |
Damping Factor | F=1 kHz at 8Ω: >350 |
The amp works very well only problem I have run into is that I have tried this amp with 4 different rack mount systems no luck only 2 screws line up to mount it to the rack it needs all 4 so I have not been able to include it with rest of equipment have sitting next to it so if your looking for a...
Received the amp, clean and powerful. the internal fan is the loudest I have ever used, not good for studio environment
I'm impressed with this power amp, it's delivering clean power to a set of Peavy PVi 10's . I was very skeptical when I ordered this because I haven't had good experiences with Gemini products in the past but I had a small band practice room and an even smaller budget but this amp delivered very...
I got this to power my miniature PA speakers, NADY PS 112, and it is really quiet... If I chain it through my home stereo to get it a little louder, it clips. The clipping lights don't stay lit very long before the thing goes into protect mode.
- 2x 125W RMS at 4Ω Stereo
- 2x 90W RMS at 8Ω Stereo
- 250W RMS at 8Ω Bridged
- Balanced XLR and 1/4" Outputs
- Unbalanced RCA Outputs
- Speakon Connections for A/B/Bridge
- 5-Way Binding Banana Post Outputs
- 10 to 50,000 Hz Frequency Response
- Front to Rear Cooling Fan
- Limiter Protection Circuits