

DPA Microphones d:fine Single Ear-Mounted Omnidirectional Headset Microphone (Black)
Model: FIOB00








| Package Weight | 0.85 lb |
|---|---|
| Box Dimensions (LxWxH) | 9.8 x 5.7 x 2.9" |
| Principle of Operation | Pressure or pressure gradient |
|---|---|
| Frequency Response | 20 Hz to 20 kHz3 dB boost at 8 to 15 kHz |
| Maximum SPL | 144 dB |
| Dynamic Range (Typical) | 97 dB (typical) |
| Signal-to-Noise Ratio | 68 dB A typical, A-weighted @ 1 kHz @ 1 Pa (94 dB SPL) |
| Power Requirements | 5 to maximum 50 V through DPA adapter for wireless systems |
| Total Harmonic Distortion | |
| Output Impedance | 30 to 40 Ω |
| Output Connectors | 1x MicroDot |
| CMRR | > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter |
| Current Consumption | 1.5 mA (microphone, typical) |
| Transducer | Pre-polarized condenser |
| Noise Level | A-weighted: 26 dB A @ 20 µPa (maximum 28 dB A, typical)ITU-R BS.468-4: 38 dB (maximum 40 dB, typical) |
| Cable | Length: 4.3' (1.3 m) Diameter: 0.06" (1.60 mm) |
| Boom | Length: 4.3" (110 mm) |
| Capsule Diameter | 0.2" (5.4 mm) |
| Polarity | + V at MicroDot pin for positive sound pressure |
| EMC Compatibility | Fully compatible |
| Temperature Range | -40 to 113°F (-40 to 45°C) |
| Relative Humidity | ≤ 90% |
| Microphone Head Size | 0.37 x 0.21 x 0.11" (9.50 x 5.30 x 2.90 mm) |
| Weight | Microphone boom: 0.03 oz (0.8 g) Earhook: 0.04 oz (1.1 g) Cable: 0.23 oz (6.6 g) Total weight: 0.3 oz (8.5 g) |
| Sensitivity | 6 mV/Pa; -44 dB @ 1 V/Pa (nominal, ± 3 dB @ 1 kHz) |
| Polar Pattern | Omnidirectional |