Crown audio XTi 6002 Power Amplifier
Model: XTI 6002


- You name the price you want to pay for a product.
- If the retailer likes your offer, you get that price for the product.
- Guaranteed Brand New Products
- All Products Sold by Manufacturer Authorized Retailers
- 30 Day Return Policy
-
Free Shipping
No Additional Fees
Packaging Info
Package Weight | 30 lb |
Box Dimensions (LxWxH) | 22.5 x 22.5 x 7" |
General Information
Input Sensitivity | 1.4Vrms |
Input Impedance | 20k Ohms (Balanced) 10 kOhms (Unbalanced) |
Gain | 32.9dB @ 1kHz, 8 Ohm Rated Output |
Frequency Response | (at 1 watt, 20Hz - 20kHz) +0dB, -1dB |
Signal-to-Noise Ratio | XTi1002/2002/4002: 100dB (A weighted) XTi6002: 103dB (A weighted) |
Total Harmonic Distortion (THD) | < 0.5% |
Connections | Input Connectors: XLR, one per channel Link/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel.Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors). HiQnet USB Connector: Type B, connects to HiQnet network. |
Output Power | 3000W @ 2 Ohms Stereo (per Channel) 2100W @ 4 Ohms Stereo (per Channel) 1200W @ 8 Ohms Stereo (per Channel) 6000W @ 4 Ohms Bridged-Mono 4200W @ 8 Ohms Bridged-Mono |
Indicators | Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs). -10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip.-20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clip Ready Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortion Temp Indicator: Red LED, one per channel, illuminates under excessive temperature conditionsPower Indicator: Blue LED illuminates when the amplifier has been turned on and has power |
Cooling | Proportional speed fan with front-to-rear airflow. |
Power Consumption | 15.3A; no more than 180W at idle |
Power Requirements | 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz |
Dimensions | 19 x 3.5 x 16.2" (48.26 x 8.89 x 41.14cm) |
Weight | 24.0 lbs (10.9kg) |
Specialties | DSP Includes EQ, Crossover Filters, Delay, and Subharmonic Synthesizer Protection for Short Circuits, Overloads, and Overheating |
Controls Front Panel | Level: Two front-panel rotary level controls, one for each channel Power Switch: On/Off switch applies AC power to the amplifierSel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockout LCD Screen: Backlit liquid crystal display that shows preset and processing status |
Damping Factor | 20Hz to 1kHz > 500 |
I have owned many amps but this amp,is by far one of the best amps I lever owned I would recommend it to anyone that's want true great amp-
Pros: Easy To Set Up,Energy Efficient,Good Power Output,Great Sound QualityCons: PriceWorks great for larger sound system
This power amplifier is an animal ! ,I have 2 of the 6002 on my subs and they drive the hell out of them I have yet to have them clip on me and I drive the hell out of them,my system consist of 2 of the 4002 running highs and mids and 2 of the 6002 on my subs powering the jbl prx 400 series cabs,use...
So is zZounds so supposed to know that crown sends these sideways europe power cords and send one that works? That is what you get when you order one so if you order one make sure they send the correct power cord for power in the states.
Great power. Really solid
- Stereo Power @ 8 Ohms: 1200W x2
- Peak Plus Limiters
- Subharmonic Synthesis
- 3 User-Defined Fan Mode Controls
- In-Depth DSP Processing
- HiQnet Band Manager & System Architect
- Crown Audio XTi 6002 Power Amplifier
- HiQnet Band Manager and System Architect Control Software
- 3 Year Warranty