Crown audio XTi 4002 Power Amplifier
Model #XTI 4002
Crown Audio Warranty


- You name the price you want to pay for a product.
- If the retailer likes your offer, you get that price for the product.
- All Products are New and from Manufacturer Authorized Retailers
- 30 day return policy
-
Free Shipping
No Additional Fees
Online Prices
We have done the shopping for you! Here is a list of the lowest prices currently found online. With Greentoe, the price will be lower than these prices. “Name Your Price” and find out.
Enter your zip code to see how much we will be saving you!
Showing prices for zip code
94103
change
Specifications
Packaging Info
Package Weight | 23.75 lb |
Box Dimensions (LxWxH) | 22.5 x 19.0 x 6.7" |
General Information
Input Sensitivity | 1.4Vrms |
Input Impedance | 20k Ohms (Balanced)10 kOhms (Unbalanced) |
Gain | 32.9dB @ 1kHz, 8 Ohm Rated Output |
Frequency Response | (at 1 watt, 20Hz - 20kHz) +0dB, -1dB |
Signal-to-Noise Ratio | XTi1002/2002/4002: 100dB (A weighted)XTi6002: 103dB (A weighted) |
Total Harmonic Distortion (THD) | < 0.5% |
Connections | Input Connectors: XLR, one per channelLink/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel.Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).HiQnet USB Connector: Type B, connects to HiQnet network. |
Output Power | 1600W @ 2 Ohms Stereo (per Channel)1200W @ 4 Ohms Stereo (per Channel)650W @ 8 Ohms Stereo (per Channel)3200W @ 4 Ohms Bridged-Mono2400W @ 8 Ohms Bridged-Mono |
Indicators | Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).-10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip.-20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clipReady Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortionTemp Indicator: Red LED, one per channel, illuminates under excessive temperature conditionsPower Indicator: Blue LED illuminates when the amplifier has been turned on and has power |
Cooling | Proportional speed fan with front-to-rear airflow. |
Power Consumption | 10.5A; no more than 38W at idle |
Power Requirements | 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz |
Dimensions | 19 x 3.5 x 12.25" (48.26 x 8.89 x 31.11cm) |
Weight | 18.5 lbs (8.4kg) |
Specialties | DSP Includes EQ, Crossover Filters, Delay, and Subharmonic SynthesizerProtection for Short Circuits, Overloads, and Overheating |
Controls Front Panel | Level: Two front-panel rotary level controls, one for each channel Power Switch: On/Off switch applies AC power to the amplifierSel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockoutLCD Screen: Backlit liquid crystal display that shows preset and processing status |
Damping Factor | 20Hz to 1kHz > 500 |
- Stereo Power @ 8 Ohms: 650W x2
- Peak Plus Limiters
- Subharmonic Synthesis
- 3 User-Defined Fan Mode Controls
- In-Depth DSP Processing
- HiQnet Band Manager & System Architect
- Crown Audio XTi 4002 Power Amplifier
- HiQnet Band Manager and System Architect Control Software
- 3 Year Warranty