Crown audio XTi 2002 Power Amplifier
Model #XTI 2002
- You name the price you want to pay for a product.
- If the retailer likes your offer, you get that price for the product.
- Guaranteed Brand New Products
- All Products Sold by Manufacturer Authorized Retailers
- 30 Day Return Policy
No Additional Fees
|Package Weight||23.75 lb|
|Box Dimensions (LxWxH)||22.5 x 18.9 x 7.1"|
|Input Impedance||20k Ohms (Balanced)10 kOhms (Unbalanced)|
|Gain||32.9dB @ 1kHz, 8 Ohm Rated Output|
|Frequency Response||(at 1 watt, 20Hz - 20kHz) +0dB, -1dB|
|Signal-to-Noise Ratio||XTi1002/2002/4002: 100dB (A weighted)XTi6002: 103dB (A weighted)|
|Total Harmonic Distortion (THD)||< 0.5%|
|Connections||Input Connectors: XLR, one per channelLink/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel.Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).HiQnet USB Connector: Type B, connects to HiQnet network.|
|Output Power||1000W @ 2 Ohms Stereo (per Channel)800W @ 4 Ohms Stereo (per Channel)475W @ 8 Ohms Stereo (per Channel)2000W @ 4 Ohms Bridged-Mono1600W @ 8 Ohms Bridged-Mono|
|Indicators||Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).-10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip.-20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clipReady Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortionTemp Indicator: Red LED, one per channel, illuminates under excessive temperature conditionsPower Indicator: Blue LED illuminates when the amplifier has been turned on and has power|
|Cooling||Proportional speed fan with front-to-rear airflow.|
|Power Consumption||8.3A; no more than 38W at idle|
|Power Requirements||100 VAC, 120 VAC, 220-240 VAC 50/60 Hz|
|Dimensions||19 x 3.5 x 12.25" (48.26 x 8.89 x 31.11cm)|
|Weight||18.5 lbs (8.4kg)|
|Specialties||DSP Includes EQ, Crossover Filters, Delay, and Subharmonic SynthesizerProtection for Short Circuits, Overloads, and Overheating|
|Controls Front Panel||Level: Two front-panel rotary level controls, one for each channel Power Switch: On/Off switch applies AC power to the amplifierSel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockoutLCD Screen: Backlit liquid crystal display that shows preset and processing status|
|Damping Factor||20Hz to 1kHz > 500|
Active systems are popular but a portable passive system requires less time to set up. One of our systems pairs our Crown XTI 2002 with a Crown XTI 4002 for a great sounding, light weight system.
Excellent AMP! I regularly use these and the 4002 and the 6002 for mid sized gigs, and they are as reliable as you can get. Better for a smaller set up as they don't pack the same punch as the 4002 or the 6002.
I purchased this in 2016, and for these last 2 years it has worked without a hiccup. Excellent functions included.
The amp section proved to be everything that we needed it to be. We used the amp to drive both monitors and mains in a small church. The DSP was another issue. After downloading Crown's latest software to a high-end laptop and allowing the software to update, we were never able to get the DSP out of...
After cranking my PA from 8am until afternoon I blew up an amp and was told by tech support that I'm a power user and need to go with a workhorse amp he recommended Crown XTi. Bought a XTi4002 to run 18" sub cabs.
I love my new Crown amp. It replaces the butterflied Crown CE1000 that was onboard my JBL MPro418SP bass bin. It handles throbbing bass without breaking a sweat. This is how bass amplification should be. I will never-ever again purchase an speaker with an amp onboard (except for studio monitors).
I bought 2 of these a few months ago, and I really love it! I use it all the time and it runs so smoothy. There's no issues with it, easy to connect. I run it on bridge, and jblbase418, it sounds amazing. Highly recommend!!
The machine is great. Understanding how to set it to levels, well, you may need a sound engineering degree for that.
The Crown XTi 2002 is very quite. You could put a mic in the same room and still record your music.
Well worth the money. Crown quality at its best. Easy to set up. Powering a Peavey 218 subwoofer with this amp. Awesome punch!
- Stereo Power @ 8 Ohms: 475W x2
- Peak Plus Limiters
- Subharmonic Synthesis
- 3 User-Defined Fan Mode Controls
- In-Depth DSP Processing
- HiQnet Band Manager & System Architect
- Crown Audio XTi 2002 Power Amplifier
- HiQnet Band Manager and System Architect Control Software
- 3 Year Warranty