Crown audio XTi 1002 Power Amplifier
Model: XTI 1002


- You name the price you want to pay for a product.
- If the retailer likes your offer, you get that price for the product.
- Guaranteed Brand New Products
- All Products Sold by Manufacturer Authorized Retailers
- 30 Day Return Policy
-
Free Shipping
No Additional Fees
Packaging Info
Package Weight | 22.0 lb |
Box Dimensions (LxWxH) | 22.5 x 19.0 x 7.0" |
General Information
Input Sensitivity | 1.4Vrms |
Input Impedance | 20k Ohms (Balanced)10 kOhms (Unbalanced) |
Gain | 32.9dB @ 1kHz, 8 Ohm Rated Output |
Frequency Response | (at 1 watt, 20Hz - 20kHz) +0dB, -1dB |
Signal-to-Noise Ratio | XTi1002/2002/4002: 100dB (A weighted)XTi6002: 103dB (A weighted) |
Total Harmonic Distortion (THD) | < 0.5% |
Connections | Input Connectors: XLR, one per channelLink/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel.Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).HiQnet USB Connector: Type B, connects to HiQnet network. |
Output Power | 700W @ 2 Ohms Stereo (per Channel)500W @ 4 Ohms Stereo (per Channel)275W @ 8 Ohms Stereo (per Channel)1400W @ 4 Ohms Bridged-Mono1000W @ 8 Ohms Bridged-Mono |
Indicators | Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).-10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip.-20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clipReady Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortionTemp Indicator: Red LED, one per channel, illuminates under excessive temperature conditionsPower Indicator: Blue LED illuminates when the amplifier has been turned on and has power |
Cooling | Proportional speed fan with front-to-rear airflow. |
Power Consumption | 6.8A; no more than 38W at idle |
Power Requirements | 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz |
Dimensions | 19 x 3.5 x 12.25" (48.26 x 8.89 x 31.11cm) |
Weight | 18.5 lbs (8.4kg) |
Specialties | DSP Includes EQ, Crossover Filters, Delay, and Subharmonic SynthesizerProtection for Short Circuits, Overloads, and Overheating |
Controls Front Panel | Level: Two front-panel rotary level controls, one for each channel Power Switch: On/Off switch applies AC power to the amplifierSel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockoutLCD Screen: Backlit liquid crystal display that shows preset and processing status |
Damping Factor | 20Hz to 1kHz > 500 |
![]() |
Nice sounding amp. Very flexible. Could give it a higher rating if the fan wasn't so noisy.
-
+
Plenty of power. Great sound.
-
-
Noisy fan
![]() |
I used these as monitor amps in a large scale event and they were absolutely fantastic! Would highly recommend any of the XTi series amps!
![]() |
looks nice, works well. It is necessary for me to use my computer to do the adjustments I need using the parametric equalizers. I I bridge the amp and use it on a "bandpass" filter so it has the cut off at the bottom frequencys to control speaker excursion and also a low pass filter to cross over...
-
+
low cost high quality and great versatility. The Crown name and the reviews I read makes me confident it is well built.
-
-
none Would have liked to see some watt output leds to see what I was feeding the speaker(s) One led at -10 (Probably 50 of the 500 available 500 watts at the brink of overload) and a second At -20 dB (5 watts) me with questionable max power being provided.
- Stereo Power @ 8 Ohms: 275W x2
- Peak Plus Limiters
- Subharmonic Synthesis
- 3 User-Defined Fan Mode Controls
- In-Depth DSP Processing
- HiQnet Band Manager & System Architect
- Crown Audio XTi 1002 Power Amplifier
- HiQnet Band Manager and System Architect Control Software
- 3 Year Warranty