- All Products are New and from Manufacturer Authorized Retailers
- 30 day return policy
- Free Shipping
No Additional Fees
|Package Weight||31.2 lb|
|Box Dimensions (LxWxH)||22.0 x 21.0 x 6.5"|
|Intermodulation Distortion||≤ 0.35% (60 Hz and 7,000 Hz at 4:1 from full rated output to -30 dB)|
|Slew Rate||>10 V/us|
|Voltage Gain||31 dB|
|Damping Factor||8 Ohm, 10 to 400 Hz: > 200|
|Signal to Noise Ratio||> 100 dB|
|Input||2x electronically balanced XLR-3F 2x electronically balanced RCA|
|Input Sensitivity||For full rated power at 8 ohms: 0.775 or 1.4 V|
|Input Impedance||Nominal balanced: 20 kilOhm Unbalanced: 10 kilOhm|
|AC Line Power||(+10%) 120V~60 Hz 220V~50/60 Hz 230-240V~50/60 Hz|
|Dimensions||19 x 3.5 x 12.4" (48.3 x 8.9 x 31.5 cm)|
|Weight||28 lb (12.7 kg)|
|Crosstalk||Below rated power: -75 dB 20 to 1,000 Hz:-59 dB|
|Output||2x binding post 2x Speakon outputs|
The Crown XLI Amplifier in my opinion is one of the best sounding power amps for that kind of money. Don't take my word for it; just read as much information as you can on Crown power amps and you will find that they are in fact the best.
Runs cool and quiet. The connectors look and feel durable for years to come. Great value for this price range with the Crown name!
i bought this amp to replace a cheap gem sounds 1000 amp and i'm extremely impressed with the difference in power and sound quality. i bought it to power a set of peavey sp 5g 15 inch tops and it does a great job i couldn't have asked for better sound, power and price.
Warm and tight. Paired with the right speakers it is very accurate. Brings music to life.
This amp is amazing, deliveries a crystal clear sound for my gemini dual 15" , I put them with a pair or jr earthquakes (cerwin vega) and the sound is amazing.
Love the experience with the crown amp I would suggest that everyone should own one
I have been looking into the Crown Audio Amplifiers for a while, was interested in the Drivecore XLS Amplifiers, but when I saw this amplifier on special I had to pill the plug. I am using this amplifier with my trusty old JBL STUDIO MONITORS 4530.
I use this amp to power two RBH 4 ohm passive subs. While setting the sub max volume setting in the receiver, it requires one to push the subs to the point of distortion, then set the max just below. I could never reach the point of distortion.
I have been using a Hafler XL-280 to power my two RBH 1010-sen subs. It is a bit light for the job at 200 watts @ 4 ohm, and cooks in my cabinet. Sub amps run up to 1k or more, and I would need two to drive four 10” reference class speakers.
I love this amp. I'm a person who looks for great, realistic sound, life like. This amp and a BBE Sonic Maximizer, two old school 15" Super Pro Woofers, two 8" Selenium JBL speakers and a couple Klipsch Heresy tweeters in two large speaker boxes on wheels.