- All Products are New and from Manufacturer Authorized Retailers
- 30 day return policy
No Additional Fees
We are sorry. At this time, we are not accepting offers on this product. Please click the button below to be notified when our retailers get it back in stock.
|Total # Of Inputs||10 Inputs|
: 3-pin XLR
: 1/4" TRS Phone
|Stereo Line Inputs||All Line Inputs|
|AUX Sends||Stereo 1/4" TRS Phone|
|BUS (Group) Outputs||Stereo Main Only: L/R 1/4" TRS Phone|
|2 Trk Master I/O||CD/Tape -
: L/R RCA Phono
: L/R RCA Phono
|Monitor Outputs||Phones: 1/4" Stereo|
|EQ Section||Low: 80Hz +/- 15dB
High: 12kHz +/- 15dB
|Channel Level Control||Rotary Controls|
|Phantom Power||+23V Phantom with AC Adapter
+18V Phantom with 9V Battery
|Metering||Stereo: 4-segment Peak LED meters|
|Frequency Response||10Hz to 20kHz (-3dB)|
|Signal-to-Noise Ratio||110dB / 112dB A-weighted|
|Total Harmonic Distortion (THD)||0.005% / 0.004% A-weighted|
|Power Supply||Power Supply
Consumption: 50W Fuse (100-120V ~50/60Hz)
Fuse (220-230V ~50/60Hz) Connector: Standard IEC
Battery: 9V Alkaline (2 required for normal operation, 3 required for phantom power use)
|Dimensions (HxWxD)||1.5/2.87 x 11.73 x 8.50" (40/73 x 298 x 216mm)|
|Weight||5.5 lbs (2.5kg)|
So many options with this solid mixer... a true workhorse. One of the few small/table top mixers with smooth accurate faders, quality preamps and plenty of mic/line/stereo options. Why people overlook this mixer is beyond me! We also have an older model;this new 1002B is even better.
I love this mixer, I have been doing legal video for 15 years and have to use wired mics. This mixer is great for getting out the noise of a/c fan. It is easy to adjust volume levels with the touch of my fingers, I can turn down all or one in a second. I highly recommend it.
Perfect small mixer. 5 XLR mic channels with stereo outs. Effects control for outboard unit. Works great. Easy to understand layout and controls.
Great little mixer. Sounds good and very versatile. I needed more line inputs than mic inputs. Using it for recording.
I know of no other mixer that packs 10 channels with TWO aux busses with SLIDERS no less. I use this in a voice booth, lets me monitor everything in my headphones, while sending a mix minus microphone to the speakers in the booth. It's made work faster and more pleasant.
I bought this for my L1 Bose system because I need a couple more inputs for my live show for bass guitar and Cajun mic. This is compact and easy to use. I was able to use the mono monitor out for my mono Bose and the stereo out straight into a recorder and the stereo channel has our break music...
I use it for jamming outside with my friends, we needed a mixer to connect 3 laptops and guitar - we like jamming outdoor - where there's no electricity available. This is where the battery power comes in handy.
Slight hiss from mixer, not a problem in Live setting. EQs work well.
The Xenyx 1002b is a good, simple mixer that has a lot for its size and price. I chose this mixer over the Mackie Mix12FX because the Xenyx has sliding faders instead of rotary control, and one more XLR input. Both need only a small amount of space.
Using this to mix/record the audio feed from a live panel discussion. For the price and functionality it's fantastic. I'm not much of an audiofile, but I found this product super easy to set up and use. The sliders were the difference maker for me.