- All Products are New and from Manufacturer Authorized Retailers
- 30 day return policy
- Free Shipping
No Additional Fees
|Package Weight||15.65 lb|
|Box Dimensions (LxWxH)||21.9 x 14.9 x 6.5"|
|Input Impedance||10 kOhms Unbalanced 20 kOhms Balanced|
|Frequency Response||20Hz - 20kHz +0/-2dB|
|Signal-to-Noise Ratio||> 100dB|
|Total Harmonic Distortion (THD)|
|Connectors||2 x XLR/TRS Combo Inputs 2 x Twist-Lock Speakon Outputs 1 x AC Power Input|
|Controls||1 x Power Switch 2 x Detented Gain Controls 1 x Crossover Switch (Full Range/100Hz) 1 x Mode Switch (Stereo/Mono)|
|Power Rating||1500W/Channel @ 8 Ohms Stereo 3000W/Channel @ 4 Ohms Stereo|
|Cooling||Continuously Variable Speed Fan, Back-to-Front Airflow|
|Protection||Thermal and DC Protection Stable into Reactive or Mismatched Loads On/Off Muting, DC Fault Power Supply Shut Down|
|Power Requirements||USA/Canada: 120V~, 60Hz (T 30 A H 250V) UK/Australia/Europe: 220-240V~, 50/60Hz (T 20 A H 250V) Korea/China: 220-240V~, 50/60Hz (T 20 A H 250V) Japan: 100V~, 50/60Hz (T 30 A H 250V)|
|Power Consumption||620W @ 4 Ohms|
|Dimensions (HxWxD)||3.7 x 19 x 12.2" (94 x 482 x 310mm)|
|Weight||11.7 lbs (5.3kg)|
|Indicators||2 x Red/Amber Power Indicators (Backlit Gain Controls) 1 x Limit LED per Channel (0dB, Full Scale) 3 x Signal LEDs per Channel (-24, -12, -6dB)|
|Damping Factor||> 140 @ 8 Ohms|
My PA system is a tri-amped set of EV-MT cabinets running in stereo. When the sub amp started failing, I began looking for a replacement. The old amp was under-powered for our subs (each cabinet is loaded with 2 EVX-180B 1000w drivers in parallel, but the amp was only rated 1250w RMS @ 4 Ohm per...
Go this to push 4 yamaha SW118V. It made me smile when checking the kick drum. Need I say more? Can't be beat for $!!!
Great amp, going to buy one more like it.
Very powerful, light weight and not too expansive.
Extremely impressed with the quality on the Behringer Nukes. They have performed flawlessly.
Unbelievable power, and unbelievable sound! It is so light, u can carry with one hand. No joke! Buy it!
Great amp! Jason T from Sweetwater helped me pick these out. I bought two of them for my subs and mid-high speakers. The built in crossovers help my specific speakers do their jobs better by focusing on the lows and highs. Not a lot of knobs so it makes it easy to use.
I just replaced two old Crown amps that were pretty solid until their old age started acting up. I power Peavey old school speakers (218 & 4115). These amps are so much lighter than my old amps which made my gig rack considerably lighter.
LITERALLY! These amps are amazing. I picked up 2 of them for my JBL PRX series speakers. Running one for my PRX415 tops, and the other for my PRX418 subs. FREAKING AMAZING!! I'm not happy about blowing my tweeters, both of them, but I learned really fast that these are amazing amps.
I own 2 QSC GX5 amps and 1 Peavey IPR2 3000 amp. I have been curious about the INukes for sometime, and I finally pulled the trigger. I have 2 15" subs loaded with EV speakers (400 watt rms), and 2 18" subs loaded with Peavey Low Riders.