

Audio-Technica ATW-1101/L System 10 Digital Wireless Lavalier Microphone Set
Model: ATW-1101/L








| Battery Life | >7 hours (alkaline) |
|---|---|
| RF Output Power | 10 mW |
| Spurious Emission | Following federal and national regulations |
| Input Connections | 1x 4-pin locking connector Wiring: Pin 1: GND Pin 2: INST INPUT Pin 3: MIC INPUT Pin 4: DC BIAS +9V |
| Batteries | 2x 1.5V AA (not included) |
| Dimensions | 2.76 x 4.21 x .98" (70.2 x 107 x 24.9 mm) |
| Weight | 3.5 oz (100 g), without batteries |
| Audio Sampling | 24 bit, 48 kHz |
|---|---|
| Operating Frequencies | 2.4 GHz ISM band |
| Dynamic Range | >109 dB (A-weighted), typical |
| Total Harmonic Distortion | |
| Operating Range | 30 m (100') typical |
| Operating Temperature Range | 0 to +40° C (32 to 104° F) |
| Frequency Response | 20 Hz to 20 kHz |
| Weight | 10.2 oz (290 g) |
|---|---|
| Power Supply | 100-240V AC (50/60 Hz) to 12V DC 0.5A, center positive, switched mode external power supply |
| Dimensions | 7.48 x 1.82 x 5.06" (190.0 x 46.2 x 128.5 mm) |
| Receiving System | Diversity (frequency/time/space) |
| Output Connections | 1x XLR, balanced 1x 1/4" (6.3 mm), unbalanced |
| Maximum Output Level | Balanced: 0 dBV Unbalanced: +6 dBV |
| Package Weight | 2.3 lb |
|---|---|
| Box Dimensions (LxWxH) | 13.7 x 11.0 x 4.3" |
| Open Circuit Sensitivity | -37 dB (14.1 mV) re 1V at 1 Pa |
|---|---|
| Connector | Locking 4-Pin HRS connector |
| Maximum Input Sound Level | 135 dB SPL, 1 kHz at 1% T.H |
| Dynamic Range | 108 dB, 1 kHz at Max SPL (typical) |
| Signal-to-Noise Ratio | 67 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 11-52V DC, 2 mA (typical) |
| Switch | Flat, roll-off |
| Impedance | 200 ohms |
| Cable Length | 55" (1.4 m) |
| Dimensions | 0.62 x 0.33 x 0.19" (15.8 x 8.3 x 5.0 mm) |
| Weight | 0.05 oz (1.3 g) |
| Element | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern | Omnidirectional |
| Frequency Response | 30 Hz - 20 kHz |
| Low Frequency Roll-Off | 80 Hz, 18 dB/octave |
