

Arri SkyPanel S30-C LED Softlight (Blue/Silver, Bare Ends)
Model: L0.0007714








| Input Range | 90-250 VAC, 50-60 Hz |
|---|---|
| Output Range | 48 VDC |
| Input Connections | powerCON TRUE1 to bare ends |
| Output Connection | Female 3-pin XLR (10 A; Pin 1: Negative / Pin 2: Positive) powerCON TRUE1 (mains power through) |
| Control | On/Off switch |
| Mounting | Super clamp attachment, SkyPanel PSU rail mount |
| Dimensions | 15.0 x 4.6 x 3.5" / 38.3 x 11.6 x 9.0 cm |
| Weight | 5.5 lb / 2.5 kg |
| Mounting | Combo pin baby 5/8" (16 mm) and junior 1 1/8" (28 mm) Aluminum yoke; +/- 90° tilt Pole operation for pan and tilt |
|---|---|
| LED Lifetime | Approx. 50,000 hours (L70) Approx. |
| Power | Lamphead voltage input: 48 VDC Power consumption: 200 W (nominal) / 240 W (maximum) Lamphead power connection: Male 3-pin XLR (15 A; Pin 1: Negative / Pin 2: Positive) Battery connector: Male 4-pin XLR (10 A; Pin 1: Negative / Pin 4: Positive) Battery DC voltage range: 23-36 VDC Battery mode light output: 100% |
| Optical System | Soft diffusion panel |
| Operating Environment | -4 to +113°F / -20 to +45°C |
| Dimensions | Panel: 15.6 x 13.5 x 5.2" / 39.7 x 34.2 x 13.3 cm Panel with yoke: 20.0 x 22 x 5.2" / 50.7 x 55.9 x 13.3 cm |
| Weight | 19.4 lb / 8.8 kg |
| Certifications | Protection class: IP 20 CE, FCC; GS, cNRTL, CB |
| Panel Active Area (WxH) | 14 x 11.8" / 35.5 x 30.0 cm |
| Beam Angle | 110° (half peak angle) |
| Color Adjustment | White light: 2,800K to 10,000K continuously variable correlated color temperature Colored light: Full RGB+W color gamut with hue and saturation control Green-Magenta: Continuously adjustable from full minusgreen to full plusgreen |
| Color Temperature Tolerance | +/- 100K (nominal) +/- 1/8 green-magenta (nominal) |
| Color Rendering Index | CRI: >95 (average) TLCI: >91 (average) |
| Dimming | 0-100% continuous |
| Control | On-board controller, 5-pin DMX in and through, EtherCon LAN network connectivity, USB-A Remote device management: DMX setup, hour counter, and standard RDM commands USB interface: DMX setup, fixture status and firmware upgrades via PC, Mac, or USB drive |