Aer Pocket Tools 2-Channel Dual Mix Preamplifier
Model: DUAL-MIX-2
AER Warranty
- You name the price you want to pay for a product.
- If the retailer likes your offer, you get that price for the product.
- Guaranteed Brand New Products
- All Products Sold by Manufacturer Authorized Retailers
- 30 Day Return Policy
-
Free Shipping
No Additional Fees
Specifications
General Information
Number of Channels | 2 |
Inputs | Switchable microphone or line input Combo socket, XLR and 1/4" jack (6.35 mm) Line Mode (Jack Input) Unbalanced high impedance input for instrument pick-ups and line-level sources Gain adjustment range: +3 to +20 dB Minimum Input Voltage: 100 mV (-20 dBV) Maximum Input Voltage: 3 V (+10 dBV) Input Impedance: 2.2 MOhms || 60 pF Signal-To-Noise Ratio, A-weighted Minimum Gain: 108 dB Maximum Gain: 98 dB Frequency Response: 20 Hz to 20 kHz / ±1 dB THD + N (1 kHz): < 0.3% Mic Mode (XLR Input) Balanced microphone input Gain Adjustment Range: +4 to +40 dB Minimum Input Voltage: 10 mV (-40 dBV) Maximum Input Voltage: 3 V (+10 dBV) Input impedance: 2.1 kOhms Unbalanced: 1.1 kOhms Signal-To-Noise Ratio, A-weighted Minimum Gain: 108 dB Maximum Gain: 93 dB Frequency Response: 20 Hz to 20 kHz / ±1 dB THD + N (1 kHz): < 0.1% Phantom Power: 24 V, R = 1.2 kOhms per terminal, switchable for each channel, Total Current maximum 10 mA per channel, short circuit protected 24 V phantom power switch off (not pushed) Clip Indicator: Red LED Headroom: 8 dB Aux In Auxiliary stereo input (mono-mixed), e.g. for CD player Cinch (RCA) sockets (left / right) and 3.5 mm stereo jack socket Level control Minimum Input Voltage: 2 x 250 mV (-14 dBV) Maximum Input Voltage: 2 x 10 V (+20 dBV) Input impedance: 10 kOhms |
Outputs | Line Out Unbalanced line output after master Mono jack, 1/4" (6.35 mm) Nominal Output Voltage: 1 V (0 dBV) Maximum Output Voltage: 9 V (+19 dBV) Output Impedance: 47 Ohms Minimum Load Impedance: 2 kOhms Residual Noise (Master Fully Anticlockwise): A-weighted: 1 μV (-120 dBV) Headphones: Stereo jack, 1/4" (6.35 mm) Output Power, 1 kHz, THD = 1%: Typical 2 x 40 mW / 32 Ohms Residual Noise (Master Fully Anticlockwise): A-weighted: 3.3 μV (-110 dBV) DI-Out: Balanced XLR output Nominal Output Voltage (Differential), Adjustment Range: 41 to 410 mV (-28 to -8 dBV) Output Impedance: 47 Ohms each terminal to ground Minimum Load Impedance (Differential): 1 kOhms Residual Noise (both Channels in Line Mode), A-weighted: 3.3 μV (-110 dBV) |
Tone Controls | Low: ±12 dB at 100 Hz (shelf type) High: ±13 dB at 10 kHz (shelf type) |
Effects | Digital effect processor with 4 presets 1 = Reverb with short predelay 2 = Reverb with long predelay 3 = Repeating delay 4 = Chorus |
Footswitch | Connector for a dual footswitch Stereo jack, 1/4" (6.35 mm) Tip = footswitch for muting channel 1 Ring = footswitch for muting channel 2 Sleeve = ground (common) Function: Switch ON = channel muted |
Supply Voltage | 24 VDC, 0.5 A |
Adapter | Mains Voltage: 100 to 240 VAC Power Consumption when used with Dual Mix: Maximum 10 W |
Housing | Aluminum |
Dimensions (WxDxH) | 4.13 x 5.31 x 2.56" (105 x 135 x 65 mm) |
Weight | 1.06 lb (0.48 kg) |
- AER Pocket Tools 2-Channel Dual Mix Preamplifier
- Mains Adapter