Car Amps

Filter Results
Search
1 - 20 of 20
Sort by: 

KICKER CX1200.1 Mono Amplifier

Model #46CXA12001

    • Efficient Class-D amplifier
    • Three-second turn-on/off delay to eliminate unwanted interference
    • Variable 12dB crossovers provides control to dial in perfect sound
    • KickEQ™ 6dB variable bass boost for those additional low frequencies
    • 24dB subsonic filter for protection from potentially damaging frequencies
    • FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
    • Accepts up to 40-volt input signal
    • Small footprint for easier installation
    • Compatible with CXARC Remote Bass Control
    • Vertical mounting hardware included for another unique look
    • Mono amplifier
    • 2 Vertical mounting brackets
    • 3mm Allen wrench
    • Four 3/4" Screws
    • Owner's manual
    • Power chart
    • Certified Power certificate
    • Efficient Class-D amplifier
    • Three-second turn-on/off delay to eliminate unwanted interference
    • Variable 12dB crossovers provides control to dial in perfect sound
    • KickEQ™ 6dB variable bass boost for those additional low frequencies
    • 24dB subsonic filter for protection from potentially damaging frequencies
    • FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
    • Accepts up to 40-volt input signal
    • Small footprint for easier installation
    • Compatible with CXARC (link to remote) Remote Bass Control
    • Vertical mounting hardware included for another unique look
    • Class D Amplifier
    • Documentation
    • Efficient Class-D amplifier
    • Three-second turn-on/off delay to eliminate unwanted interference
    • Variable 12dB crossovers provides control to dial in perfect sound
    • KickEQ™ 6dB variable bass boost for those additional low frequencies
    • 24dB subsonic filter for protection from potentially damaging frequencies
    • FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
    • Accepts up to 40-volt input signal
    • Small footprint for easier installation
    • Compatible with CXARC (link to remote) Remote Bass Control
    • Vertical mounting hardware included for another unique look
    • Mono amplifier
    • 2 Vertical mounting brackets
    • Four 3/4" Screws
    • Documentation
    • Compact size
    • High and low level inputs
    • Selectable output
    • Variable crossovers
    • Conformal-coated PCB
      • Amplifier
      • Stainless steel mounting hardware
      • Rubber inserts
      • 4 x High-level input adapters
      • 3 x spare fuses
      • 2 x 2-color brand stickers
      • Quick start guide

    KICKER CX1800.1 Mono Amplifier

    Model #46CXA18001

      • Efficient Class-D amplifier
      • Three-second turn-on/off delay to eliminate unwanted interference
      • Variable 12dB crossovers provides control to dial in perfect sound
      • KickEQ™ 6dB variable bass boost for those additional low frequencies
      • 24dB subsonic filter for protection from potentially damaging frequencies
      • FIT+™ (Fail-safe Integration Technology-PLUS) means it works with nearly every radio
      • Accepts up to 40-volt input signal
      • Small footprint for easier installation
      • Compatible with CXARC Remote Bass Control
      • Vertical mounting hardware included for another unique look
      • CX1800.1 Mono Amplifier
      • Documentations
      • Digital Signal Processing with 24dB and 48dB crossover slopes
      • Angel hair anodized finish
      • 7 color selectable color changing LED panel
      • M-Equalization bass boost subwoofer system
      • Optional wireless bass remote
      • Bass boost up to 18dB
      • DC/Signal sense/12V turn-on
      • 5-Channel Amplifier
      • Documentation
      • Compact footprint
      • Full On-Board Protection
      • Input level control
      • Switchable bass EQ
      • Cool industrial design
        • Amplifier
        • Spare Fuse (x2 for 1-channel and 4-channel model)
        • Quick start guide
        • High-level input cable (x2 for 4-channel model).
        • Mounting hardware
        • Mounting screws
        • 4-channel car amplifier
        • 100 watts RMS x 4 at 4 ohms
        • 240 watts RMS x 2 in bridged mode
        • Separate variable high- and low-pass filters
        • Preamp inputs and outputs
        • Fuse rating: 30A x 2
          • 4-Channel Class D Car Amplifier
          • Documentation

        JBL Mono Class D Amplifier

        Model #STADIUM600

          • Class D Design
          • Low Distortion
          • Full On-Board Protection
          • Proprietary High-Conductivity Terminals
          • Compact footprint
          • Remote Bass Control
            • Mono Class D Amplifier
            • 2 x Differential Speaker-Level Adapter
            • 2 x Spare Fuses
            • 4 x Philip Screws
            • 1 x Remote Bass Control & Cable
            • 1 x E.A.R.L Terminal
            • 3 x Self-Tapping Screws
            • Documentation
            • Diecast aluminum heatsink
            • Signal sensing auto turn on
            • Hidden top mounted control panel
            • 12dB/octave Butterworth crossover
            • 1Ω stable (MONO Amps)
            • Short circuit protection
            • Remote bass knob
            • Input select switch (4/5 channel models)
            • 300W 2-Channel Amplifier
            • Documentation
            • 2-channel car amplifier
            • 75 watts RMS x 2 at 4 ohms (150 watts x 2 at 2 ohms)
            • 300 watts RMS x 1 bridged output at 4 ohms (4-ohm stable in bridged mode)
            • Variable high- and low-pass filters (40-350 Hz at 12 dB per octave)
            • Variable bass boost (0-18 dB at 40 Hz)
            • Remote bass level control
            • Tri-way capable (Tri-Way crossover required)
            • MOSFET power supply
            • CEA-2006 compliant
            • Speaker-level inputs with Smart Engage Auto Turn-on feature (eliminates the need for a remote turn-on connection)
            • Fuse rating: 20A x 2
            • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
            • 11-5/16"W x 2-5/8"H x 9-3/4"D
            • 2-Channel amplifier
            • Speaker-level input harness (4-pin Molex plug with attached 9" wires)
            • Remote subwoofer level control with attached 17.75' cable (with right-angle 3.5mm male mini-plug on one end)
            • Subwoofer level control mounting bracket
            • Self-adhesive "Min/Max" label
            • Knob (for the Subwoofer Level Control)
            • 2 Self-tapping screws
            • Large flat washer
            • 2 Small flat washers
            • 2 Lock washers
            • Hex nut
            • 4" wire tie
            • Owner's Manual (English/Spanish/French/Germany)
            • Audio Performance Dyno Certificate
            • MTX Audio Motorsports decal
            • Compact footprint
            • Full On-Board Protection
            • Input Level Control
            • Switchable bass EQ
            • Industrial design
            • Crossover mode switch
              • Amplifier
              • Spare Fuse (x2 for 1-channel and 4-channel model)
              • High-level input cable (x2 for 4-channel model)
              • 2 x two-color JBL Brand Stickers
              • Handles up to 700W peak power
              • 1% THD (Total Harmonic Distortion)
              • Class AB for full-range speakers and class D for subwoofer
              • Variable bass boost
              • Die-cast aluminum heat sink
              • Remote bass knob included
              • Short circuit protection
              • Bright blue LED accent strip
              • Memphis Car Audio Power Reference 700W Class AB Multichannel Amplifier
              • Remote bass knob
              • Documentation
              • mono subwoofer amplifier
              • 150 watts RMS x 1 at 4 ohms
              • 250 watts RMS x 1 at 2 ohms
              • Class AB amp technology
              • variable low-pass filter (30-250 Hz, 12 dB/octave)
              • selectable bass boost (0, 6, 12 dB at 45 Hz)
              • variable subsonic filter (15-50 Hz, 12 dB/octave)
              • Mono amplifier
              • Four 15-amp ATO fuses (2 installed/2 spare)
              • Remote level control module
              • 16.25' Remote cable (RJ-25 plugs on both ends)
              • Four 5/8" Screws
              • Two 3/8" Screws
              • 4 Split-lock washers
              • Owner's manual
              • Warranty information
              • Class D Design
              • Low Distortion
              • Full On-Board Protection
              • Proprietary High-Conductivity Terminals
              • Compact footprint
              • Sleek design
              • DBO™ (Dynamic Bass Optimizer)
              • Remote Bass Control
              • 1 x Amplifier
              • 2 x Differential Speaker-Level Adapter
              • 2 x Spare Fuses
              • 4 x Philip Screws
              • 1 x Remote Bass Control & Cable
              • 1 x E.A.R.L Terminal
              • 3 x Self-Tapping Screws
              • MODEL 1200W High Output MONOBLOCK Amplifier Up to 900 W X 1 RMS @ 1 ohm Up to 450 W X 1 RMS @ 2 ohm Up to 225 W X 1 RMS @ 4 ohm
              • Monoblock, Class D, MOSFET Power Supply
              • High and Low Level Inputs,
              • Fixed High Pass Crossover, Variable Low Pass
              • Crossover, Variable Bass Boost and Variable Subsonic Filter
              • Remote Subwoofer Control
              • Illuminated End Panel Strips 5 Years Elite Warranty
              • MODEL 1200W High Output MONOBLOCK Amplifier
              • Power harness,
              • Mounting screws
              • User's manual
              • Compact size
              • High and low level inputs
              • Selectable output
              • Variable crossovers
              • Conformal-coated PCB
                • Amplifier
                • Stainless steel mounting hardware
                • Rubber inserts
                • 4 x High-level input adapters
                • 3 x spare fuses
                • 2 x 2-color brand stickers
                • Quick start guide
                • 1,600 Watts gives you all the power you need
                • 4 Channels
                • Tucked away and out of sight
                • Wide range of applications
                • Extremely power efficient amplifier
                • Compact mini design
                  • 4 Channel Mini Compact Amplifier
                  • Documentation
                  • MODEL 1500W High Output MONOBLOCK Amplifier Up to 1125 W X 1 RMS @ 2 ohm Up to 563 W X 1 RMS @ 4 ohm Monoblock, Class A/B, MOSFET Power Supply High and Low Level Inputs, Variable Low Pass Crossover, Switchable Bass Boost Include Remote Subwoofer Control 5 Years Elite Warranty Dimensions: 10" L x 7" W x 2.5" H
                    • Amplifier
                    • Wired gain knob (wire attached)
                    • Mounting screws (4)
                    • User manual
                    • Class D Design
                    • Low Distortion
                    • Full On-Board Protection
                    • Proprietary High-Conductivity Terminals
                    • Compact footprint
                    • Sleek design
                    • DBO™ (Dynamic Bass Optimizer)
                    • Remote Bass Control
                    • Kappa One K 1000W Subwoofer Amplifier
                    • Documentation
                  ×
                  ×

                  Validating Credit Card...

                  It will not be processed until the offer is accepted by a merchant.

                  Notifying Retailers...

                  Notifying our merchants and checking to see if they accept this offer.

                  Offer Submitted!

                  ×
                  3-digit code in the back of your credit card
                  ×
                  ×
                  ×
                  ×
                  ×
                  ×