Tech 21 SansAmp VT Bass Rack Preamp

The VT Bass Rack is an expanded version of Tech 21's popular VT Bass pedal. In addition to Drive, Character and active EQ controls, this single-space format incorporates a Blend control to adjust the amount and balance of direct instrument signal with the SansAmp circuitry. There’s also an XLR Output Level control for optimum performance with PA systems. Other features include an Effect Loop with a Mix 50/50 switch (for parallel or series operation), an XLR output with selectable levels, and a buffered direct XLR output to provide a dry signal.Sample settings in the manual include: SVT-style, Fat Tube, Flip Top-style, Rage, Thumpy Funk, Fuzzed out, Warm Compression, and Yes-style.

• Input Impedance-Input 1: 1MΩ
• Input Impedance-Input 2: 1MΩ
• Output Impedance-1/4”: 1K Ohm min
• Output Impedance-XLR: 600 Ohm min
• Input Level-Input 1: 1V RMS max
• Input Level-Input 2: 1V RMS or 10V max, with -20dB pad engaged
• Output Level-XLR: Switchable to -20dB or 0dB range
• Maximum Output Level: +10dB or better
• Effects Loop Send: 1K Ohm min, -20dB
• Effects Loop Return: 100K Ohm min, -20dB
• Low Frequency Response: 10Hz or better*
• High Frequency Response: Harmonic content, 20kHz or better*
• Maximum Power Consumption: 5 Watts
• AC Input Power (factory set): 100V, 117V, 230V, 240V
• Cycles: 50/60 Hz
• NOTE: Each unit is constructed for specific voltages. AC power cannot be switched.
• Enclosure: Aluminum and steel, fully shielded
• Dimensions (WxHxD): 19.0" x 1.75" x 5.25" / Overall depth: 6.25"
• Weight: 5 lb.