ClickCease

Shure QLXD14/SM35 VHF Wireless Headworn Microphone System (V50: 174 to 216 MHz)

Model: QLXD14/SM35-V50

Shure Warranty
Shure qlxd14 sm35 v50 1
Shure qlxd14 sm35 v50 1
Shure qlxd14 sm35 v50 2
Shure qlxd14 sm35 v50 3
Shure qlxd14 sm35 v50 4
How it works
  • You name the price you want to pay for a product.
  • We send your offer to a network of Certified Retailers.
  • If the retailer likes your offer, you get that price for the product.
Greentoe Guarantee
  • Guaranteed Brand New Products
  • All Products Sold by Manufacturer Authorized Retailers
  • 30 Day Return Policy
  • Free Shipping
    No Additional Fees

Product Unavailable

We are sorry. At this time, we are not accepting offers on this product.

Specifications

Transmitter

Weight 4.9 oz (138 g) without batteries
Dimensions (H x W x D) 3.38 x 2.57 x 0.92" (86 x 65 x 23 mm)
RF Output Connector: SMA Antenna Type: 1/4 wave Impedance: 50 ohms Occupied Bandwidth: Less than 200 kHz Modulation Type: Shure proprietary digital Power: 1 mW or 10 mW Varies by region
Audio Input Connector: 4-pin male mini connector (TA4M) Configuration: Unbalanced Impedance: 1 MOhm Maximum Input Level 1 kHz at 1% THD: 8.5 dBV (7.5 Vpp) Preamplifier Equivalent Input Noise (EIN) System Gain Setting ≥ +20: -120 dBV, A-weighted, typical
Battery Runtime At 10 mW: Shure SB900: up to 10 hours Alkaline: up to 9 hours
Battery Type Shure SB900 rechargeable Li-Ion or AA batteries 1.5 V
Mic Offset Range 0 to 21 dB (in 3 dB steps)
Housing Cast aluminum

System Specifications

Total Harmonic Distortion (THD) -12 dBFS Input, System Gain @ +10: Less than 0.1%
Polarity System Audio: Positive pressure on microphone diaphragm produces positive voltage on pin 2 (with respect to pin 3 of XLR output) and the tip of the 1/4" (6.35 mm) output
Operating Temperature Range 0 to 122°F (-18 to 50°C) Note: Battery characteristics may limit this range
Storage Temperature Range -20 to 165°F (-29 to 74°C) Note: Battery characteristics may limit this range.
RF Carrier Frequency Range V50: 174 to 216 MHz
Working Range 328' (100 m) Note: Actual range depends on RF signal absorption, reflection and interference
RF Tuning Step Size: 25 kHz, varies by region
Image Rejection Greater than 70 dB, typical
RF Sensitivity -97 dBm at 10-5 BER
Latency Less than 2.9 ms
Audio Frequency Response QLXD1: 20 Hz - 20 kHz (±1 dB)
Audio Dynamic Range System Gain @ +10: Greater than 120 dB, A-weighted, typical

Receiver

Dimensions (H x W x D) 1.63 x 7.75 x 5.94" (41 x 197 x 151 mm)
Weight 1.71 lb (777 g)
Networking Network Interface: Single Port Ethernet 10/100 Mbps Network Addressing Capability: DHCP or Manual IP address Maximum Ethernet Cable Length: 328' (100 m)
Audio Output Gain Adjustment Range: -18 to +42 dB in 1 dB steps Configuration: 1/4" (6.35 mm), Impedance balanced (Tip=audio, Ring=no audio, Sleeve=ground) XLR: Balanced (1=ground, 2=audio +, 3=audio -) Impedance 1/4" (6.35 mm), 100 ohms (50 ohms Unbalanced) XLR: 100 ohms Full Scale Output: 1/4" (6.35 mm), +12 dBV XLR: LINE setting= +18 dBV, MIC setting= -12 dBV Mic/Line Switch: 30 dB pad Phantom Power Protection: 1/4" (6.35 mm), Yes XLR: Yes
RF Input Spurious Rejection: Greater than 80 dB, typical Connector Type: BNC Impedance: 50 ohms
Power Requirement 12 VDC @ 0.4 A, supplied by external power supply (tip positive)
Housing Steel

Headset

Polar Pattern Cardioid
Frequency Response 40 Hz to 20 kHz
Type Electret Condenser
Product Highlights
  • 20 Hz to 20 kHz Frequency Range
  • 24-Bit Digital Audio
  • Network Control
  • AES-256 Encryption
  • Built-In Switching Diversity
  • Automatic Channel Scan
  • More the 60 Channels per Frequency Band
  • Includes SM35 Headset
  • QLXD1 Bodypack Transmitter
  • Power Supply is Included
In The Box
  • Shure QLXD14/SM35 VHF Wireless Headworn Microphone System (V50: 174 to 216 MHz)
  • SM35 Performance Headset Condenser Microphone (TA4F)
  • QLXD1 VHF Wireless Bodypack Transmitter (174 to 216 MHz)
  • QLXD4 VHF Digital Wireless Receiver (V50: 174 to 216 MHz)
  • Limited 2-Year Warranty
Still Have Questions?
We can help via Live Chat, Email or you can call us 1-888-840-0464

Please log in or sign up to continue

×
×
×

Validating Credit Card...

It will not be processed until the offer is accepted by a merchant.

Notifying Retailers...

Notifying our merchants and checking to see if they accept this offer.

Offer Submitted!

×
3-digit code in the back of your credit card
×
×
×
×
×
×