ClickCease

Crown audio XTi 2002 Power Amplifier

Model: XTI 2002

Crown Audio Warranty
Crown audio xti 2002 1
Crown audio xti 2002 1
Crown audio xti 2002 2
Crown audio xti 2002 3
How it works
  • You name the price you want to pay for a product.
  • We send your offer to a network of Certified Retailers.
  • If the retailer likes your offer, you get that price for the product.
Greentoe Guarantee
  • Guaranteed Brand New Products
  • All Products Sold by Manufacturer Authorized Retailers
  • 30 Day Return Policy
  • Free Shipping
    No Additional Fees

Product Unavailable

We are sorry. At this time, we are not accepting offers on this product.

Specifications

Packaging Info

Package Weight 23.75 lb
Box Dimensions (LxWxH) 22.5 x 18.9 x 7.1"

General Information

Input Sensitivity 1.4Vrms
Input Impedance 20k Ohms (Balanced)10 kOhms (Unbalanced)
Gain 32.9dB @ 1kHz, 8 Ohm Rated Output
Frequency Response (at 1 watt, 20Hz - 20kHz) +0dB, -1dB
Signal-to-Noise Ratio XTi1002/2002/4002: 100dB (A weighted)XTi6002: 103dB (A weighted)
Total Harmonic Distortion (THD) < 0.5%
Connections Input Connectors: XLR, one per channelLink/Out Connector: Loop-thru signal from input connector for linking another amplifier, one per channel.Output Connectors: Two Neutrik Speakon NL4MP output connectors. Channel-1 Speakon is wired with Ch. 1 and Ch. 2 outputs for use with optional single 4-conductor cable. Two binding post outputs (in parallel with Speakon connectors).HiQnet USB Connector: Type B, connects to HiQnet network.
Output Power 1000W @ 2 Ohms Stereo (per Channel)800W @ 4 Ohms Stereo (per Channel)475W @ 8 Ohms Stereo (per Channel)2000W @ 4 Ohms Bridged-Mono1600W @ 8 Ohms Bridged-Mono
Indicators Signal Indicator: Green LED, one per channel, illuminates when a very low-level signal is present at input (may be used for troubleshooting cable runs).-10 Indicator: Green LED flashes when output signal exceeds -10 dB below clip.-20 Indicator: Green LED flashes when output signal level exceeds -20 dB below clipReady Indicator: Green LED, one per channel, illuminates when the amplifier is ready to produce audio.Clip Indicator: Red LED, one per channel, turns on at the threshold of audible distortionTemp Indicator: Red LED, one per channel, illuminates under excessive temperature conditionsPower Indicator: Blue LED illuminates when the amplifier has been turned on and has power
Cooling Proportional speed fan with front-to-rear airflow.
Power Consumption 8.3A; no more than 38W at idle
Power Requirements 100 VAC, 120 VAC, 220-240 VAC 50/60 Hz
Dimensions 19 x 3.5 x 12.25" (48.26 x 8.89 x 31.11cm)
Weight 18.5 lbs (8.4kg)
Specialties DSP Includes EQ, Crossover Filters, Delay, and Subharmonic SynthesizerProtection for Short Circuits, Overloads, and Overheating
Controls Front Panel Level: Two front-panel rotary level controls, one for each channel Power Switch: On/Off switch applies AC power to the amplifierSel/Prev/Next Buttons: Three buttons near the LCD screen that are used to access menu items and front panel lockoutLCD Screen: Backlit liquid crystal display that shows preset and processing status
Damping Factor 20Hz to 1kHz > 500
User Reviews
30 May 2018
10/10

I purchased this in 2016, and for these last 2 years it has worked without a hiccup. Excellent functions included.

5 March 2015
4.0/10

The amp section proved to be everything that we needed it to be. We used the amp to drive both monitors and mains in a small church. The DSP was another issue. After downloading Crown's latest software to a high-end laptop and allowing the software to update, we were never able to get the DSP out of...

18 September 2013
10/10

I love my new Crown amp. It replaces the butterflied Crown CE1000 that was onboard my JBL MPro418SP bass bin. It handles throbbing bass without breaking a sweat. This is how bass amplification should be. I will never-ever again purchase an speaker with an amp onboard (except for studio monitors).

11 December 2013
8.0/10

The machine is great. Understanding how to set it to levels, well, you may need a sound engineering degree for that.

16 November 2013
10/10

The Crown XTi 2002 is very quite. You could put a mic in the same room and still record your music.

31 October 2011
8.0/10

No problems so far. Loads of power in bridged mono mode. Sonically fine, would recommend.

28 December 2021
10/10

Active systems are popular but a portable passive system requires less time to set up. One of our systems pairs our Crown XTI 2002 with a Crown XTI 4002 for a great sounding, light weight system.

5 September 2019
10/10

After cranking my PA from 8am until afternoon I blew up an amp and was told by tech support that I'm a power user and need to go with a workhorse amp he recommended Crown XTi. Bought a XTi4002 to run 18" sub cabs.

10 August 2018
10/10

Well worth the money clean sound for my LA mids.

9 August 2018
10/10

I bought 2 of these a few months ago, and I really love it! I use it all the time and it runs so smoothy. There's no issues with it, easy to connect. I run it on bridge, and jblbase418, it sounds amazing. Highly recommend!!

Product Highlights
  • Stereo Power @ 8 Ohms: 475W x2
  • Peak Plus Limiters
  • Subharmonic Synthesis
  • 3 User-Defined Fan Mode Controls
  • In-Depth DSP Processing
  • HiQnet Band Manager & System Architect
In The Box
  • Crown Audio XTi 2002 Power Amplifier
  • HiQnet Band Manager and System Architect Control Software
  • 3 Year Warranty
Still Have Questions?
We can help via Live Chat, Email or you can call us 1-888-840-0464

Please log in or sign up to continue

×
×
×

Validating Credit Card...

It will not be processed until the offer is accepted by a merchant.

Notifying Retailers...

Notifying our merchants and checking to see if they accept this offer.

Offer Submitted!

×
3-digit code in the back of your credit card
×
×
×
×
×
×