Blade Inductrix FPV Racing Drone (BNF)
Model: BLH8580
BLADE Warranty
- Guaranteed Brand New Products
- All Products Sold by Manufacturer Authorized Retailers
- 30 Day Return Policy
-
Free Shipping
No Additional Fees
Specifications
Performance
Flight Time | 3 to 4 minutes |
Motors
Motor Velocity Constant | 14,300 Kv |
General
Flying Weight | 0.8 oz / 24 g |
Configuration | Quadcopter |
Completion Level | Bind-n-Fly (BNF) |
Construction | Main Blade Material: Plastic Main Frame Material: Plastic |
Dimensions (H x L x W) | 1.1 x 3.3 x 3.3" / 28 x 83 x 83 mm |
FPV Monitor
Display | Size: 4.3" Resolution: 480 x 272 Aspect Ratio: 16:9 |
Signal System | NTSC |
Power Requirements | 500 mA at 5 V |
Video Receiver | Frequency Range: 5645 to 5945 MHz Number of Channels: 32 (8 channels / 4 bands) Audio: 6.0 to 6.5 MHz Note: Compatibility guaranteed only with Fat Shark and ImmersionRC transmitters |
Battery | Chemistry: Lithium-ion Capacity: 1800 mAh Charging Method: USB Battery Life: Approximately 2 hours |
Dimensions | 4.8 x 3.1 x 0.6" / 122.7 x 80 x 14.5 mm |
FPV Camera
Weight | 0.2 oz / 5 g (with housing) |
Video Transmitter | Frequency: 5.8 GHz Number of Channels: 7 |
Power Requirements | 3.0 to 5.5 V (1S battery) |
Dimensions | Excluding Protrusions: 0.5 x 0.7 x 0.4" / 13.2 x 17.6 x 9 mm Lens: 0.4 (length) x 0.4" (diameter) / 9 (length) x 10 mm (diameter) |
Signal System | NTSC |
Flight Controller
Number of Channels | 4 |
Flight Battery
Capacity | 200 mAh |
Chemistry | Lithium-ion polymer (LiPo) |
- Integrated Camera and 4.3" FPV Monitor
- 25mW Video Transmitter
- Supports All Raceband Video Channels
- Up to 100 Yard Line-of-Sight FPV Range
- LED Lighting for Orientation/Feedback
- Three to Four Minutes of Flight Time
- Blade SAFE Technology
- 14,300 Kv Motors
- Headset Adapter for Monitor Available
- 200mAh Battery and USB Charger
- BLADE Inductrix FPV Racing Drone (BNF)
- 1S USB LiPo Charger - 300mA
- EFLB2001S45 200mAh LiPo Flight Battery
- SPMVM430 4.3" FPV Video Monitor with Sunshade and Mount
- mLP TX Smart Phone Holder